User's Manual

HARDWARE INSTALLATION

LED Indicator

LNK (LINK)

The LNK indicator lights green when the WLAN PCI Adapter is

connected to a network successfully. Otherwise the LNK indicator

remains off while the W LAN is scanning the wireless devices.

Installing the WLAN PCI Adapter

1. Shut down the computer, unplugs its power cord, and remove the

chassis cover.

2. Insert the contact edge of the WLA N PCI Adapter into the

connector of any available PCI Bus Master expansion slot. Press

the card firmly into the connector such that the card’ s contacts are

fully seated in the PCI slot connector.

3. Install the bracket screw and secure the card to the comp uter chassis.

4. Cover the computer’ s chassis.

5. Switch computer power on. The computer will automatically

activate the newly installed driver and utility the WLAN PCI

Adapter.