User's Manual

3
HARDWARE INSTALLATION
LED Indicator
LNK (LINK)
The LNK indicator will blinks green while the Wireless Cardbus adapter is
connecting to the networking, it will lights green when the Wireless Cardbus
Adapter is connected to the networking, otherwise, it is off.
ACT (Activity)
The ACT indicator blinks green when the Wireless Cardbus Adapter is connected
to a network successfully and transmitting data. Otherwise the LNK indicator is off
whiles the Wireless LAN is stand by.
Check the installation
The LEDs of the Wireless Cardbus Adapter are clearly visible and the status of the
network link can be seen instantly:
1. Once the device is plugged to the station’ s Cardbus slot, the PWR LED of the
Wireless Cardbus Adapter will light up indicating a normal status.
2. When the device plugged to the station’ s Cardbus slot and the driver was
installed, the LNK LED will start blinking, it means that the device is starting to
scan the wireless devices near the Wireless Cardbus Adapter.
3. While the Wireless Cardbus Adapter linked up and transmitting data to the
Access Point or to other Wireless LAN station, the LNK LED will start blinking.