Bluetooth v2.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). This device complies with Part 15 of the FCC Rules.
TABLE OF CONTENTS INTRODUCTION .........................................................................................1 BLUETOOTH TECHNOLOGY ..........................................................................1 ABOUT THE BLUETOOTH V2.0+EDR USB ADAPTER ..................................1 PRODUCT FEATURES ....................................................................................2 UNPACKING .................................................................................................
PIM SYNCHRONIZATION ............................................................................33 PIM ITEM TRANSFER .................................................................................35 PRINTER ....................................................................................................37 BLUETOOTH SERVICE ...........................................................................39 NOTIFICATIONS SERVICE............................................................................
INTRODUCTION Thank you for purchasing of the Bluetooth V2.0+EDR USB Adapter. This Adapter will allow you connect to other Bluetooth devices. Bluetooth Technology Bluetooth is a short range wireless communication technology. It allows wireless connections between Bluetooth devices such as cellular phones, personal digital assistants (PDA), desktop and notebooks computers, mouse, keyboards, printers, and home appliances.
Product Features Bluetooth v2.0 + EDR Specification compliant USB 2.0 full-speed compliant Supports Bluetooth Enhanced Data Rate (EDR) compliant with v2.0.E.2 of specification for both 2Mbps and 3Mbps modulation modes Full Speed Bluetooth Operation with Full Piconet Support Scatternet Supported Support Bluetooth Class 2 Supports all Bluetooth 2.
Unpacking Open the shipping package of the Bluetooth V2.0+EDR USB Adapter and carefully unpack its contents. The package should contain the following items: One Bluetooth V2.0+EDR USB Adapter One Installation CD with Driver, User’s Manual and Bluetooth Software If any item is found missing or damaged, please contact your local reseller for replacement.
INSTALLATION THE BLUETOOTH SOFTWARE Install the driver and software located on the CD that came with your purchase BEFORE installation the Bluetooth USB Adapter into your computer. Insert the Bluetooth Driver/Software CD into your CD-ROM drive and the Auto-run program will appear. Alternatively this can also be done manually by double clicking the autorun.exe file on the CD.
Installation the Bluetooth Software Click Next to contiune the software installation.
Read the END USER LINCENSE AGGREEMENT than selected “I accept the terms in the license agreement” and click Next to continue the software installation. Click Next to continue the software installation. Click Install to start the software installation.
Start the software installation. Click OK to continue the software installation.
Now plug the Bluetooth V2.0+EDR USB Adapter to an available USB port, than ckick OK to continue the software installation. Click Finsh to finsh the software installation.
Using the Bluetooth Software After you have completed the driver and software installation and reboot your computer, a Bluetooth icon will appear on your desktop and in the bottom right hand corner of your desktop screen (systray). The Bluetooth icon gives you access to My Bluetooth Places, for configuring your Bluetooth settings. Double the Bluetooth icon for access to My Bluetooth Place. The Bluetooth Configuration Wizard launches the first time that you double click on My Network Place.
Type a unique name for your Computer. Select Desktop or Laptop than Click Next. Click Next to continue the configuration.
Select the Services that your Bluetooth USB Adapter will provide to other Bluetooth products than click Next to continue the configuration.
You can configure your other Bluetooth devices at this step. Otherwise, click Skip to finish the configuration for your Bluetooth USB Adapter. Click Next to continue the configuration. Click Finish to finish the configuration.
INTRODUCTION THE BLUETOOTH SOFTWARE Bluetooth Tray The Bluetooth tray resides in the Windows system tray, which is normally located in the lower-right corner of the screen. The Bluetooth tray provides fast access to most Bluetooth operations. Access My Bluetooth Places Double-click the Bluetooth icon or right-click the Bluetooth icon and then select Explore My Bluetooth Places.
To stop Bluetooth: in the Windows system tray, right-click the Bluetooth icon and select Stop the Bluetooth Device. The Bluetooth icon is blue in color with a red insert when Bluetooth is stopped. Icons Used for Bluetooth Devices and Services The Bluetooth icon Bluetooth status. in the Windows system tray provides feedback about The Bluetooth USB Adapter enabled. The Bluetooth USB Adapter disabled or not plugged. The Bluetooth was connected with other Bluetooth devices.
Using the Bluetooth Setup Wizard From the Folders pane of Windows Explorer, right-click My Bluetooth Places and select Bluetooth Setup Wizard or In Windows Explorer, with My Bluetooth Places selected, from the Bluetooth menu, select Bluetooth Setup Wizard or From the Windows system tray: right-click the Bluetooth icon and select Bluetooth Setup Wizard. Follow the wizard’s on-screen instructions.
performed by Bluetooth. To be certain that the displayed list of devices in the neighborhood is current, or if automatic periodic inquiry is not enabled, force an update of the device list using the technique described in Search for Devices, above. Some devices within connection range may not show up in the list of devices found because: Your device is configured to report only specific types or classes of devices (Bluetooth Configuration Panel Æ Discovery tab, on your device).
require security measures before allowing a remote Bluetooth device to connect. Bluetooth services require a Bluetooth application on the remote device; services and applications usually have coinciding names; i.e., there is a Bluetooth Fax Service and a Bluetooth Fax Application. The services supported by Bluetooth are: Bluetooth Serial Port -- a wireless connection between two devices. This connection can be used by applications as though a physical serial cable connected the devices.
Bluetooth Connection Status The Bluetooth Connection Status dialog box displays information about the state of a connection and provides a means to disconnect an active connection. Display the Connection Status dialog box: in My Bluetooth Places, from the Folders pane, select a device, and then, in the right pane of My Bluetooth Places, right-click a service name and select Status from the shortcut menu.
Send to Bluetooth This feature is used to send information to another Bluetooth device. Data types include: Files from Windows Explorer Documents from Microsoft Office applications, including: Word Excel Access PowerPoint Microsoft Outlook items, including: Contacts Appointments Tasks Messages Notes. To use Send to Bluetooth In the application: Windows Explorer -- select one or more files to be transferred. Folders cannot be transferred.
Access the Bluetooth Configuration Panel The Bluetooth Configuration Panel provides access to settings for Bluetooth services, client applications, hardware, security, discovery, accessibility, default paths, event notification and other Bluetooth related items. To Open the Bluetooth Configuration Panel: From the Windows Control Panel, select Bluetooth Configuration or In the Windows System Tray, right-click the Bluetooth icon, and select Advanced Configuration from the shortcut menu.
Bluetooth Exchange Folder This is the highest-level directory on this computer to which a remote Bluetooth device has access. Devices that have been granted access to this computer’s Bluetooth Exchange Folder also have access to all sub-folders contained within that folder and all files in those sub-folders. NOTE: The Bluetooth Exchange Folder is shared by the PIM Item Transfer and the File Transfer services and can be configured from the Properties page of either of those services.
BLUETOOTH APPLICATION Bluetooth Applications Overview Identity Computer Name -- enter a unique name to identify this computer to other Bluetooth devices in the vicinity; this field cannot be left blank. Computer type -- select either Desktop or Laptop from the shortcut menu to set the type of icon remote devices will use to represent this computer.
General Configuration All of the built-in Bluetooth applications allow you to rename the application and to require a secure connection when using the application.
Create a Bluetooth HID connection Open a connection to a Bluetooth Human Interface Device using one of these techniques: From My Bluetooth Places Using the Bluetooth Setup Wizard Once an HID connection is established, that connection will persist. If the computer is shut down, when the computer is turned on again the connection will re-establish automatically.
Audio Gateway Overview The Audio Gateway Application allows a remote Bluetooth device to use this computer’s microphone and speakers as the remote device’s audio input and output devices.
Bluetooth Serial Port The Bluetooth Serial Port application allows this computer to establish a wireless serial connection with a remote Bluetooth device. The applications on both this computer and the remote device must be configured to send and receive data to and from the respective communications port (COM port) assigned to the Bluetooth serial port. The wireless serial connection may then be used by the applications as though a physical serial cable connected the devices.
Dial-up Networking Overview The Bluetooth Dial-up Networking application allows this computer to use a modem that is physically connected to a remote device to access the Internet, and log on to a remote network.
FAX Overview The Bluetooth Fax service allows this computer to send a fax using a Fax/ Modem that is physically connected to a remote device. To Send a Fax 1. Open a connection to the Fax service that is provided by another Bluetooth device, using one of these techniques: Windows system tray, Bluetooth icon From My Bluetooth Places Using the Bluetooth Setup Wizard 2.
Headset Overview The Headset application allows this computer to use a Bluetooth headset (or any other device that offers the Bluetooth headset service) as the audio input and output device for this computer. Possible uses include: If this computer has on-board telephone hardware, a Bluetooth headset might be used as the audio input/output device to make/receive telephone calls. If this computer has voice recognition capabilities, a Bluetooth headset might be used as the audio input device.
Headset and then select the device that is providing the service (active connections have a checkmark in front of them). or No matter how the connection was created, in My Bluetooth Places, right-click the service name and select Disconnect. Configure The Bluetooth Configuration Panel Æ Client Applications Æ Headset Æ General tab provides options to configure: The application name Æ to change it, highlight the existing name and enter the new name. Enable or disable secure connection.
Other file operations Right-click a file or folder in the remote device’s Public Folder for a context sensitive menu. All potential menu options may not be available at all times. Potential menu options include: Open -- opens the selected file on this computer, using the default application for this type of file. Print -- sends the selected file to this computer’s default printer.
Network Access Overview The Bluetooth Network Access application makes it possible for this computer: To connect to a Local Area Network via a physical connection on a remote Bluetooth device. or To connect to an ad hoc network provided by a remote Bluetooth device. The type of network connection that is available is determined by the configuration of the remote Bluetooth device.
Configure The Bluetooth Configuration Panel Æ Client Applications Æ Network Access Æ General tab provides options to configure: The application name -- to change it, highlight the existing name and enter the new name. Enable or disable secure connection. To enable secure connection, place a checkmark in the box.
Configure PIM Synchronization The Bluetooth Configuration Panel Æ Client Applications Æ PIM Synchronization Æ General tab provides options to configure: The application name -- to change it, highlight the existing name and enter the new name. Enable or disable secure connection. To enable secure connection, place a checkmark in the box.
PIM Item Transfer Overview The Bluetooth PIM Item Transfer application allows this computer to send and receive Personal Information Manager items to-and-from a remote Bluetooth device. Item transfer can be accomplished several ways: To send, receive or exchange business cards: 1. From Windows Explorer, My Bluetooth Places, right-click the PIM Item Transfer service on a remote device and select the appropriate option.
Configure PIM Item Transfer The Bluetooth Configuration Panel Æ Client Applications Æ PIM Item Transfer Æ General tab provides options to configure: The application name -- to change it, highlight the existing name and enter the new name. Enable or disable secure connection. To enable secure connection, place a checkmark in the box. How your business card is handled when it is requested by a remote device.
Printer Overview The Bluetooth Printer application allows this computer to use a Bluetooth printer. Once a Bluetooth printer has been properly installed, it can be used from this computer in the same way as any other printer would be. Configure The Bluetooth Configuration Panel Æ Client Applications Æ Printer Æ General tab provides options to configure: The application name -- to change it, highlight the existing name and enter the new name. Enable or disable secure connection.
Option Two: 1. From the Windows Control Panel, select Printers Æ Add Printer Æ Next Æ Local printer Æ Next. 2. On the Select the Printer Port screen of the wizard: a. Select Create a new port b. In the Type shortcut menu, select Bluetooth Printer Port, and then click Next. 3. On the next screen, select the printer by name, and then click Connect. 4. Install the driver: when asked to select a printer make and model, do so.
BLUETOOTH SERVICE Common Configuration Settings These properties can be set individually for each Bluetooth service: Service Name -- the default name of each service can be changed. Secure Connection -- requires that remote devices provide proof of identity and that all data be encrypted. Startup Automatically -- starts the service automatically when Bluetooth is started.
Example Both Authentication and Authorization request notifications are controlled by whether Secure Connection is enabled for an individual service. An example of how notifications might work when a remote device attempts to access a service on this computer, if all notifications are enabled: 1. Authentication: a balloon notification (audio optional) appears to prompt for a PIN code. If the PIN code does not match the code entered on the remote device, the connection will not be allowed.
Service Access Notification “Notifications” lets you associate a sound (Windows *.wav file) and/or a visual indication with access attempts by remote devices. A different notification sound can be associated with each local Bluetooth service. Associate a sound with service access From the Bluetooth Configuration Panel, Local Services tab: 1. Double-click a service name and then select the Notifications tab. 2. Check the desired options; visual and sound may both be selected for a single event. 3.
Configure the Audio Gateway Service From the Windows system tray, right-click the Bluetooth icon, select Advanced Configuration Æ Local Services, and then double-click the Audio Gateway service. Set the common configuration properties of the service, and then click OK. Bluetooth Serial Port Service The Bluetooth Serial Port service allows a remote Bluetooth device to establish a wireless serial connection with this computer.
To add a port 1. 2. 3. 4. 5. 6. 7. From the Bluetooth Configuration Panel, Local Services tab, click Add Serial Service. In the properties dialog box, modify the properties. Enter a unique name (less than 99 alphanumeric characters). Select secure connection, if desired. Select Startup Automatically, if desired. From the COM Port shortcut menu select a communications port that is not assigned to any other service. Click OK.
FAX Service The Fax service allows a remote Bluetooth device to send a Fax via a modem that is physically attached to this computer. Configure the Fax service From the Windows system tray, right-click the Bluetooth icon, select Advanced Configuration Æ Local Services, and then double-click the Fax service. Select the physical modem to be used from the Modems: shortcut menu. Set the common configuration properties of the service, and then click OK.
Copy to/from a remote device In the Folders pane of Windows Explorer, from the Entire Bluetooth Neighborhood branch, select a device and expand that branch to view the Bluetooth Exchange Folder of the remote device. Use drag-and-drop to copy any file or folder contained in the Public Folder of the remote device to the desired folder on this computer. You can also drag-and-drop files or folders from this computer to the Public Folder (and its sub-folders) of the remote device.
Headset Service The Bluetooth Headset Service allows this computer to provide audio input/ output for remote Bluetooth devices. For example, if the remote device is a Bluetooth telephone, this computer’s microphone and speakers can be used as speakerphone input and output for that device. Hardware Requirements This computer must have a sound card, microphone, and speakers installed. The Bluetooth radio on both on this computer and the remote device must support audio.
Network Access Service The Bluetooth Network Access service makes it possible for a remote Bluetooth device to access a Local Area Network that is physically attached to this computer or allows a remote device to become part of an ad hoc network provided by this computer. After this computer has been configured to provide the Network Access service to other Bluetooth devices, it will not be able to use the Bluetooth Network Access service provided by another Bluetooth device without being re-configured.
Setup for Windows 2000 and Windows XP If Internet Connection sharing was previously enabled (before BTW was installed) it must be disabled and then re-enabled before the Bluetooth network adapter can use it. Configure for Network Access: 1. From the Windows system tray, right-click the Bluetooth icon and select Advanced Configuration from the shortcut menu. 2. In the Bluetooth configuration panel, select the Local Services tab, Network Access and then click Properties.... 3.
PIM Item Transfer Overview The PIM Item Transfer service allows Personal Information Manager items to be transferred between this computer and a remote Bluetooth device. Four data types are supported: Business Cards Calendar Items Email Messages Notes Each data type can be saved in any of the supported and installed PIMs. When the PIM that is associated with an individual data type is changed on the PIM Item Transfer page, that data type is also changed for the PIM Synchronization service.
Previously sent business cards -- once a card is selected using the “Always send the same business card” option, above, that card will be added to the shortcut menu as an option. Where to store inbound data items, on an individual basis.
Change the selected PIM On the PIM Item Transfer properties page, “Received items” section, there is a Business Cards shortcut menu. When a PIM was selected during initial setup the selected item in this menu was set to the same PIM. To change the PIM used for the default business card, open this shortcut menu and select a new PIM. Choose a default business card 1. In the Select a Bluetooth Business Card dialog box that appears when “Always send the same business card” is selected, highlight the card. 2.
PIM Synchronization The PIM Synchronization service can be used by a remote device to synchronize its Personal Information Manager (PIM) database with the PIM database of this computer. Four data types are supported: Business cards Calendar items Email messages Notes Whether an individual item is accepted and where it is stored, when accepted, is configured in the PIM Item Transfer service.
BLUETOOTH SETTINGS Hardware Settings The Hardware tab of the Bluetooth Configuration Panel provides basic information about the Bluetooth hardware installed on this computer and access to the Advanced Settings dialog box, if required: Devices: Name: the name of the device, e.g., WIDCOMM Bluetooth Device Type: the type of device, e.g., USB. Device Properties: Device status: indicates that the device is operating properly or that there is a problem/conflict.
Advanced Settings When available, this dialog box is reached from the Hardware tab of the Bluetooth Configuration Panel. NOTE: Depending on the country in which the hardware is sold and/or in which it will be used, the Advanced button may not be present. From this dialog box you can set the: Country Code: North America, Europe (except France), and Japan France and China Maximum Transmission Power: High Medium Low Click Apply to implement the changes.
Accessibility Settings The Accessibility tab of the Bluetooth Configuration Panel lets you specify whether remote devices may access this computer, which remote devices have access, and whether an audio warning is played when a Personal Identification Number (PIN code) is required. Allow other devices to discover this computer Select “Let other Bluetooth devices discover this computer” to permit remote Bluetooth devices to find and report this computer.
Choose an audio notification file When Secure Connection is enabled for any of the Bluetooth Services on his computer a PIN code is required before that service can be accessed. To chose a notification sound that will play when a remote device attempts to access a service that requires a secure connection, click Select audio file... and select the sound (*.wav) file to be played.
Determine the devices that will be reported Bluetooth can screen out devices that you do not need access to. The options are: Report all Bluetooth devices. Report only selected Bluetooth devices (see Discovery, Adding Specific Devices and Discovery, Deleting Specific Devices). Select the desired option from the drop-down list. Discover Specific Devices The type of device(s) that this computer looks for and reports when it is searching for other Bluetooth devices can be limited.
Temporarily override the discovery of specific devices In the Bluetooth Configuration Panel, from the Discovery tab, select “Report all Bluetooth devices.” The specifically selected devices will be discovered along with all other devices. To re-enable specific device discovery re-select “Report only selected Bluetooth devices.
SECURITY Authentication Authentication is used to verify identity; it requires a passkey or link key from the remote device. When a remote device attempts access, a visual and/or audio warning notifies the local operator. If the notification is ignored, access is denied after a preset timeout. When devices are “paired,” those devices automatically exchange a link key and Authentication is carried out without operator intervention.
Encryption Encrypting data translates it into an unreadable format using a secret key or password. Decrypting the data requires the same key or password that was used to encrypt it. Link Key A unique, internally generated, access code based on a passkey, the Bluetooth Device Address and an internally generated random number. Link keys are generated automatically when devices Pair. After a link key is generated, manual entry of the passkey is not required.
Remove Pairing In the Folders pane of My Bluetooth Places, right-click a paired device and select Unpair Device from the shortcut menu. Passkey An alphanumeric string up to 16 characters in length. Passkeys are also called Personal Identification Numbers, or PIN codes. A passkey may be required if the Secure Connection option is enabled for a Bluetooth service or application. Secure Connection A passkey or link key is required each time a connection is attempted.
SPECIFICATIONS Bluetooth v2.0+EDR Specification Compliant Universal Serial Bus v2.0, v1.1, v1.0 USB v2.0 with Type-A plug (backward compatible with USB v1.0, v1.1) Basic data rate: up to 723.2Kbps Enhanced data rate: up to 2Mbps and 3Mbps Standards: Inferface: Data Speed: Frequency band: 2.400~2.