User manual

46
C
B
EN
The Multi-FX Bar has 2 adjustable brackets for ceiling mounting (A). Ensure you have a firm footing and secure the device to the safety eyelet
(B). Thanks to the integrated 35 mm stand flange (C), the Multi-FX Bar can be mounted on a suitable light stand. Important Information: Overhead
installation should only be carried out by trained personnel. During installation and mounting, make sure to observe the notes under “CAUTION!”
IMPORTANT INFORMATION ABOUT LASER PRODUCTS! in this user’s manual.
DE
Die Multi-FX-Bar verfügt über 2 verstellbare Bügel für die Deckenmontage (A). Achten Sie auf festen Halt und sichern Sie das Gerät an der
Sicherungsöse (B). Dank des integrierten 35mm Stativflansches (C) kann die Multi-FX-Bar auf ein geeignetes Lichtstativ montiert werden. Wichtige
Hinweise: Überkopfmontage darf nur von dafür ausgebildetem Personal durchgeführt werden. Achten Sie bei Aufstellung und Montage auf die
Anmerkungen unter Punkt „VORSICHT! WICHTIGE HINWEISE IN BEZUG AUF LASER-PRODUKTE!“ in dieser Anleitung.
FR
La barre multieffets dispose de 2 supports réglables pour montage au plafond (A). Vérifiez qu’elle est bien fixée et sécurisez l’appareil via
l’œillet de sécurité (B). Le puits pour pied 35 mm intégré (C) permet de fixer la barre multieffets sur un pied d’éclairage. Avertissement important : Le
montage en hauteur doit être exclusivement effectué par du personnel spécialement formé. Lors du la mise en place et du montage, respectez les
instructions rassemblées dans la section «ATTENTION ! CONSEILS IMPORTANTS POUR LES PRODUITS UTILISANT UN LASER !» dans ce manuel
utilisateur.
ES
La barra multiefectos dispone de 2 soportes ajustables para el montaje en techo (A). Verifique que están bien apretados y asegure el equipo
introduciendo un cable a través de la argolla de seguridad (B). Gracias al adaptador integrado de 35mm (C) se puede montar la barra multiefectos
en un soporte de iluminación adecuado. Información importante: El montaje suspendido sólo puede realizarse por personal experimentado. Al realizar
la instalación y el montaje, tenga en cuenta las advertencias de la sección ¡ATENCIÓN: INFORMACIÓN IMPORTANTE SOBRE LOS PRODUCTOS LÁSER!
de este manual.
PL
Listwa Multi FX posiada 2 regulowane uchwyty do montażu na suficie (A). Upewnić się, że urządzenie zostało prawidłowo zamocowane, a
następnie zabezpieczyć je, wykorzystując do tego celu oczko zabezpieczające (B). Dzięki zintegrowanemu kołnierzowi statywu 35 mm (C) listwę
Multi FX można zamontować na odpowiednim statywie oświetleniowym. WAŻNE WSKAZÓWKI: montaż nad głową może być wykonywany wyłącznie
przez odpowiednio przeszkolony personel. Przy ustawianiu i montażu należy zwrócić uwagę na informacje przedstawione w punkcie „OSTROŻNIE!
WAŻNE WSKAZÓWKI DOTYCZĄCE PRODUKTÓW LASEROWYCH!” niniejszej instrukcji.
IT
La barra Multi FX dispone di due staffe regolabili per il montaggio a parete (A). Controllare la tenuta e fissare il dispositivo all’occhiello di
sicurezza (B). Grazie alle flangia stativo da 35mm integrata (C) la barra Multi FX può essere montata su un supporto per luci adatto. Note importanti:
il montaggio sopratesta deve essere eseguito esclusivamente da personale qualificato. Durante l’installazione e il montaggio prestare attenzione
all’indicazione riportata al punto “ATTENZIONE! INDICAZIONI IMPORTANTI RELATIVE AI PRODOTTI LASER!” in questo manuale.
A
SETTING UP AND MOUNTING / AUFSTELLUNG UND MONTAGE / MISE EN PLACE ET MONTAGE /
INSTALACIÓN Y MONTAJE / USTAWIENIE I MONTAŻ / INSTALLAZIONE E MONTAGGIO