Instructions

11
DMX
DEUTSCHFRANCAIS
ESPAÑOL
ENGLISH
ITALIANO POLSKI
STANDALONE MODE COLOR PRESET
15 different color presets, plus Jump and Fade, are available as preset programmes. The brightness can be separately set for each preset
and the running speed for Jump and Fade.
Starting from the main display, press MODE to enter the main menu. Now use UP and DOWN to select the menu item Stand Alone and
confirm with ENTER. Again use UP and DOWN to select standalone mode Color Preset and confirm with ENTER. Now use UP and DOWN to
select the desired color preset and confirm with ENTER (Off = blackout, Speed refers to Jump and Fade). You can now use UP and DOWN to
set the desired brightness between 000 and 100. Confirm with ENTER.
--------Menu-------
DMX Address
DMX Mode
DMX Delay
Standalone
Slave
Settings
System Info
----Standalone----
Auto
Static
Color Preset
User Color
Loop
----Color Preset----
Off
Red
Amber
Yel Warm
Yellow
Green
Turquoise
White
Cold White
Jump
Fade
Speed
White
Cold White
UV
Jump
Fade
Speed
0–100
0–100
0–100
0–100
0–100
0–100
ROOTPAR4 ROOTPAR6
0–100
0–100
0–100
0–100
0–100
0–100
0–100
0–100
0–100
0–100
0–100
Cyan
Blue
Lavender
Mauve
Magenta
Pink
Warm White
0–100
0–100
0–100
0–100
0–100
0–100
0–100
STANDALONE MODE USER COLOR
The standalone mode User Color allows you to store four individual color presets of overall brightness, strobe and a color blend of R, G, B
and W or R, G, B, W, A and UV directly in the device.
Starting from the main display, press MODE to enter the main menu. Now use UP and DOWN to select the menu item Stand Alone and
confirm with ENTER. Again use UP and DOWN to select the standalone mode User Color and confirm with ENTER. Using UP and DOWN,
now select the desired preset (color 1 to 4) and confirm with ENTER. Using UP and DOWN, now select the menu item that you wish
to edit and confirm with ENTER. You can use UP and DOWN to configure the desired value between 000 and 255. The strobe effect values
correspond to those in channel 2 of the DMX table 5 CH Mode 1 and channel 3 of table 10 CH Mode. Confirm all entries with ENTER.
--------Menu-------
DMX Address
DMX Mode
DMX Delay
Standalone
Slave
Settings
System Info
----Standalone----
Auto
Static
Color Preset
User Color
Loop
-------Color x-------
Dimmer
Strobe
Red
Green
Blue
White
Amber
UV
-------Color x-------
Dimmer
Strobe
Red
Green
Blue
White
0–255
0–255
0–255
0–255
0–255
0–255
CLROOTPAR4 CLROOTPAR6
0–255
0–255
0–255
0–255
0–255
0–255
0–255
0–255
----User Color----
Color 1
|
Color 4
STANDALONE MODE STATIC
The standalone mode static allows the dimmer, strobe, R, G, B and W values and the R, G, B, W, A and UV values to be set directly on the
device, with values between 000 and 255, in a similar way to with a DMX controller. In this way, an individual scene can be created without
an additional DMX controller.
Starting from the main display, press MODE to enter the main menu. Now use UP and DOWN to select the menu item Stand Alone and
confirm with ENTER. Again use UP and DOWN to select standalone mode Static and confirm with ENTER. Using UP and DOWN, now select
the menu item that you wish to edit and confirm with ENTER. You can use UP and DOWN to configure the desired value between 000 and
255. Confirm all entries with ENTER.
--------Menu-------
DMX Address
DMX Mode
DMX Delay
Standalone
Slave
Settings
System Info
----Standalone----
Auto
Static
Color Preset
User Color
Loop
-----Static Mode-----
Dimmer
Strobe
Red
Green
Blue
White
Amber
UV
----Static Mode----
Dimmer
Strobe
Red
Green
Blue
White
0–255
0–255
0–255
0–255
0–255
0–255
CLROOTPAR4 CLROOTPAR6
0–255
0–255
0–255
0–255
0–255
0–255
0–255
0–255