Instructions

14
DMX
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCH
ENGLISH
Settings
Disp Rev = Rotate display No No display rotation
Yes Display is rotated by 180°
(e.g. for overhead installation)
Disp Back = Display lighting Off Deactivates after approximately 30 seconds of inactivity
On On permanently
Sig Fail = Operating status
with DMX signal
fault
Hold Last command is retained
Black Activates blackout
User 1 User Color 1 is activated
Sound = Sets music
control
Last Color is retained until next impulse
Off Color expires after a moment, until next impulse
PWM = LED PWM frequency 650 Hz, 1530 Hz,
2150 Hz, 4000 Hz
Select LED PWM frequency
Calibration
(CLROOTPAR4)
= Color calibration Red, Green, Blue,
White
Individual color calibration. Cross-mode brightness setting of
the 4 LED groups RGBW with values from 0 to 255
Calibration
(CLROOTPAR6)
= Color calibration Red, Green, Blue,
White, Amber, UV
Individual color calibration. Cross-mode brightness setting of
the 6 LED groups RGBWA+UV with values from 0 to 255
IR Remote = Activate or deactivate
control by IR
remote control
On IR remote control activated
Off IR remote control deactivated
Mode
Slave
Master unit
Auto Programme 1
Delay 0.5 s
Slave Group 0
No delay
Slave Group 1
0.5 s delay
Slave Group 2
1 s delay
Slave Group 3
1.5 s delay
Slave Group 4
2 s delay
Slave Group 5
2.5 s delay
Gr 1 0.5
s
Gr 2 0.5
s
Gr 3 0.5
s
Gr 3 0.5
s
Gr 3 0.5
s
Gr 4 0.5
s
Gr 5 0.5
s
Mode
Slave
Mode
Slave
Mode
Slave
Mode
Slave
Mode
Slave
Mode
Slave
Mode
Slave
SYSTEM SETTINGS (Settings)
Starting from the main display, press MODE to enter the main menu. Use UP and DOWN to select the menu item Settings and confirm with
ENTER.
--------Menu-------
DMX Address
DMX Mode
DMX Delay
Standalone
Slave
Settings
System Info
This will take you to the submenu for setting the submenu items (see table, select with UP and DOWN, confirm with ENTER, change value or
status with UP and DOWN, confirm with ENTER).
SYSTEM INFORMATION (System Info)