Installation Guide

37
LOAD A SCREW PLACE TOOL ON BOARD DRIVE
Load an Edge screw into the magnetized
screw channel.
Align the screw channel with the joist,
ensuring the face of the tool is fl at. Tooth
should be on the edge of the board.
Drive the screw until it’s fully seated in the
board.
How to fasten Edge screws
1 2 3
MARKSMAN®
BEFORE YOU BEGIN
Where Edge fastening with the
MARKSMAN EDGE isn’t possible,
use CAMO Premium Deck or
Composite Screws. Go to page 54
for full instructions.
MARKSMAN PRO TOOLSINTRODUCTION MARKSMAN EDGE