Operating instructions

OPERATION
10 Hrs
or Each
Use
1
st
Month
or 20
Hrs
1
st
50
Hrs
Every 3
Months
or 50
Hrs
1
st
100
Hrs
Every 6
Months
or 100
Hrs
Every
Year or
300 Hrs
Check engine oil level 10W/40
X X X X X X X
Fuel tank fill
X X X X X X X
Remove grease and oil build-up
X X X X X X X
Cutter wheel – sharpen or change teeth
X
Cutter wheel bearings – lubricate
X X X X X X X
Air filter – check
X X X X X X X
Air filter – clean
X X X X
Air filter – replace
X
Walk around inspection
X X X X X X X
Engine leaks – check
X
Engine oil – change
X X X
Engine mounts – check
X X X X X
V-belt tension – check
X X X X X
Brake – adjust
X X
Brake lining – check
X
Tyre condition – check
X
Tyre pressure – 20psi
X
Spark plug – clean & re-adjust
X X
Spark plug – replace
X
Sediment cup – clean
X
Idle speed – check & adjust
X
Valve clearance – check & adjust
X
Fuel tank & strainer – clean
X
Fuel line – check
X
NOTE:
?DO NOT allow maximum engine speed to exceed 3600rpm.
?Cutting teeth must be kept sharp. Blunt teeth will cause damage to the machine
and high vibration levels for the operator.
MAINTENANCE
CAMON C500 Stump Grinder
CAMON C500 Stump Grinder
CAMON-C500/11.11/20 CAMON-C500/11.11/21
Maintenance Overview