RV-562/-564/-566 5,6” Rear view system VEHICLE 7 5.6” TFT LCD LANGUAGE INSTRUCTION MANUAL Thank you for purchasing this product. For proper usages and application, Please read this instruction manual thoroughly PRINTED IN KOREA ver. 1.
CONTENTS SAFEGUARD INSTRUCTIONS---------------------------------------- FEATURE ------------------------------------------------------ BOX CONTENTS -------------------------------------------------------BEDIENELEMENTE ----------------------------------------------------- FUNCTION OF EACH PART FUNCTION 2 ---------------------------------------- ------------------------------------------------------------ CONNECTIONS ---------------------------------------------------- INSTALLATION -------------
SAFEGUARD INSTRUCTIONS 5,6” Video Rückfahrsystem Please read the “Safety Rules” carefully before using this product. Following the safety rules prevents users from damages related with the misuse of the product. It is very important to follow these safety rules. We state “Caution” and “Warning” to clarify any potential risk for a damage associated with the misuse of the product. CAUTION WARNING This information is for preventing damage or shorten the life time of the products.
WARNING Do not put the product in place where sudden temperature increasing and should use on optimum voltage, temperature and humidity Do not get product wet and operate with wet hands. --- It may cause to electronic shock or malfunction. Do not place where interfere with visual field and watch or operate monitor during driving. Keep clean dust on power socket. Do not pull cord with a jerk, should catch a plug and pull. Do not use damaged cord. When clean exterior, power off and wipe with dry cloth.
1 FEATURE 5,6” Rear view system CM-562 • 8bit MICRO controller • TFT LCD with high resolution and low reflection • All functions are displayed on screen (OSD function) • PWM volume control • Mode selection function • Low energy consuming rate • Language Display Selection (KOR-JPN-GER-ENG-SPA-FRE-ITA) • 1 Cable solution • Free voltage (From DC 12V to DC 24V) • Dimmer selection function CM-32 • 1/3” COLOUR- CCD Sensor • 6 IR LEDs for night view • Built-in microphone • Built-in heating function • Waterproof
2 BOX CONTENTS 5,6” Rear view system Monitor Stand Monitor Cable CM-42 CM-46 Cigar Cable Optional CM-31/-32 Accessory Pack 3 FUNCTION OF EACH PART 5,6” Rear view system 6 ① S/BY LED Stand-by Display ② POWER Power ON/OFF button ③ MODE CAM1 / CAM2 / AV selection function ④ MENU SETUP/PICTURE selection function ⑤ UP/DOWN SOUND/MENU level control
4 FUNCTION 5,6” Rear view system 1 POWER ON OFF 1) Press [POWER] button to the power. (STAND BY state is OFF) 2) Press [POWER] button again to off the power. 2 MODE • It is a function to change video signal. CAM1 3MODE CAM1(AV1) 1) Press [MODE] button. 2) CAM1/CAM2/AV1 appears on the screen and it is disappearing 5 seconds after setting. CAM2(AV2) AV(AV3) 3 UP/DOWN • Press VOL◀▶(VOL+/-) button on remote control or UP/DOWN button on monitor to adjust volume.
4 MENU • It is a function to select MAIN MENU (SETUP/PICTURE/CAMERA) 1) Press [MENU] button to select MAIN MENU, changed color in red when it is selected. SETUP PICTURE CAMERA 2) Press [MODE] button to select SUB MENU, UP/DOWN button to change SUB MENU. DIMMER LANGUAGE DIRECTION RESET CONTRAST BRIGHTNESS COLOR TINT ENGLISH 0˚ ▶ 70 70 50 50 [ 1.
[ 2. PICTURE USER ] 1) MODE button to select CONTRAST, BRIGHTNESS, COLOR, TINT MENU. (Selected menu in red) 2) Push VOLUME UP/DOWN button to change the settings of the diferent menu points. CONTRAST BRIGHTNESS COLOR TINT 70 70 50 50 CONTRAST BRIGHTNESS COLOR TINT 70 70 50 50 CONTRAST BRIGHTNESS COLOR TINT 70 70 50 50 CONTRAST BRIGHTNESS COLOR TINT 70 70 50 50 [ 3. CAMERA (OPTION) ] 1) Press the mode button to choose CAM1; CAM 2 will turn red. CAM1 NORMAL 2) P ress the VOLUME UP, DOWN button.
GREEN (CAMERA 2) DC INPUT AUDIO VIDEO GREEN(CAMERA2) BLACK(CAMERA1) FOR REAR VIEW Connect this line to “+” of reverse light lamp. FOR SIDE VIEW Connect this line to “+” of side light lamp. MDM-026A (OPTION) BLACK (CAMERA 1, Priority) 10 CAMERA 2 CAMERA 1 CIGAR CABLE CAMERA(OPTION) 5 CONNECTIONS 5.
6 INSTALLATION 5.6” TFT LCD COLOR MONITOR (1) Please set the place for Monitor installation. Clean the place where to install stand and install stand firmly after removing protect tape of stand bottom. (2) Fix the stand with enclosed screws. (3) Assemble the monitor to stand and fix it in the right angle. (4) Connect cable as follows.
Cameras 1. Determine a position and a direction of installation so that the rear view can be effectively seen on the monitor screen. 2. Fix the camera bracket to the vehicle using the provided adhesive tape and tapping screws. 3. Place a camera and sun visor to fixed bracket and assemble them with enclosed screws. 4. Run the cable from the monitor to the camera. CM-32 Screws Sun visor Screws camera bracket camera bracket Selfadhesif glue CM-32A Camera Connector 1. CAMERA B+ (DC +12V) 2.
CM-42 CM-42A Camera connector 1. CAMERA B+ (DC +12V) 2. HEATING B+ (DC +12V) 3. STAND BY 4. VIDEO OUT 5. AUDIO OUT 6. N.C 7. GND CM-46 CM-46 Camera connector * When you install the sun visor, please be careful not to touch with shutter moving area. 1. CAMERA B+ (DC +12V) 2. HEATING B+ (DC +12V) 3. STAND BY 4. VIDEO OUT 5. AUDIO OUT(OPTION) 6. N.C 7.
7 SPECIFICATION 5,6” Rear view system CM-562 SPECIFICATION ITEM NTSC LCD PANEL POWER SUPPLY INPUT SYSTEM FREQUENCY VIDEO INPUT SIGNAL 142.2 mm (5.6 inch) DISPLAY FOMAT 320(H) x 3(RGB) x 234(V) DOT PITCH 0.118(W) x 0.362(H) mm BRIGHTNESS 350 cd/m2 ACTIVE AREA 113.28 (W) x 84.7 (H) mm VIEW ANGLE 65˚(H) / 45˚(U) / 65˚(D) VOLTAGE DC 12V - 24V CONSUMPTION 450mA (DC 12V, Monitor Set Only) AUTO (NTSC/PAL) HORIZONTAL 15.734 Khz 15.
CM-42 Pick-up device View of angle Minimum illumination Input voltage Operating temperature Dimensions Weight NTSC PAL 1/3” 250,000 pixels COLOR CCD 1/3” 290,000 pixels COLOR CCD 95˚(H) / 70˚(V) / 120˚(D) 0.1 lux DC 12V / 200mA Max. -15˚C ~ 65˚C (5˚F ~ 149˚F) 78.4(W) x 52.0(H) x 56.5(D) mm / 3.09(W) x 2.04(H) x 2.22(D) (Camera Only) 0.4kg / 0.
Tel. Fax. E-mail Internet 16 +49 (0) 4154 / 7093202 - 0 +49 (0) 4154 / 7093202 - 20 info@camos-multimedia.com www.camos-multimedia.com Address IMC GmbH (Germany) Nikolaus-Otto-Str.