Operation Manual

16
Headset registration & connection
To use the headset, you have to connect it to another wireless Bluetooth device. If this device
has a display, the headsets will be displayed as CAMOS BHS-600 or CAMOS BHS-500.
1.) Connect headset with mobile phone
(Channel 1)
1a) BHS-500: Press the „-“ key to activate the headset. After this, press the „+“ key until the
red LED is blinking fast. Activate the Bluetooth function of your mobile phone
simultaneously.
1b) BHS-600: After the headset has been switched on, enable the headset on channel 1 (CH 1)
and press the „-“ key for 3 sec. Activate the Bluetooth function of your mobile phone
simultaneously.
2) Switch the pairing key of your headset from position CH1 for a short time to position CH2
and back to CH1.
3) The Pairing-Mode is now activated. Generally the mobile phone will ask for a four-digit code.
Most mobile phones accept 0000. In case this code is not accepted, please make use of your
mobile phones‘ manual. Once the devices are paired successfully they will keep on recogni
zing each other automatically.
Notes:
• If you want to listen to music via your mobile phone, please make use of your mobile phone‘s
instruction manual.
• If you want to disconnect your mobile phone, switch off the bluetooth function of your mobile
phone. The headset can now be linked to another bluetooth compliant device.