Operation Manual

18
4.) Connect Two Way Radio on channel 2 (only BHS-600)
Instead of intercom function you can link a two way radio which is equipped with a bluetooth
adapter.
1) Switch the headset‘s key in „Slave Mode“ position.
2) Switch the Pairing-key of your headset from position CH2 for a short time to
position CH1 and
back to CH2.
5.) Connect mobile phone on channel 2 (only BHS-600)
If you don‘t need the intercom function the BHS-600 enables you to connect a mobile phone
on channel 2. Unlike channel 1 the mobile phone has to support Monofunction and has only
secondary priority.
1) During an incoming call while channel 1 is activated on your device, you will hear both
channels simultaneously.
2) To accept a call you have to say loud and clear „Hello“ to your microphone.Channel 1 will be
muted an you can start the conversation.
3) If you remain silent longer than 5 seconds, the device on channel 1 will be reactivated. To
mute channel 1 you have to say „hello“ again.