Operation Manual

23
4.) Intercom functionality (only BHS-600)
a) After you connected both BHS-600 headsets, you can use the intercom functionality.
b) To stop the conversation, press both buttons, „-“ & „+“, for 1 second at the same time.
c) To go on with the conversation, press both buttons, „-“ & „+“, for 2 seconds at the same time.
5.) Intercom functionality while listening to music (only BHS-600)
a) Connect channel 1 with your mobile phone or audio device and activate the music.
b) Connect the two BHS-600 on channel 2.
c) As soon as the driver or passenger speaks into its microphone, channel 1 (music) will be
muted.
d) If there is no conversation for more than 10 sec., channel 1 will be automatically activated
again.
e) You can totally switch off the intercom functionality if pressing the „-“ & „+“ buttons for 1 sec.
at the same time.
f) To activate the intercom functionality again, just press the „-“ & „+“ buttons again for 1 sec. at
the same time.