Instruction manual

Headset registration & connection

To use the headset, you have to connect it to another wireless Bluetooth device. If this device

contains a display, the headsets will be displayed as CAMOS BHS-600 or CAMOS BHS-500.

1.) Connect headset with mobile phone (Channel 1)

1) To enable the headset on channel 1 (CH 1) press the „-“ key for 3 Sec. Activate

simultaneously the Bluetooth-function of your mobile phone.

2) Switch the Pairing-key of your headsets from position CH1 for a short time to position CH2

and back to CH1.

3) The Pairing-Mode is now activated. Generally the mobile phone will ask for a four-digit code.

Most mobile phones accept the 0000. In case this code is not accepted, make use of the mo-

bile phone‘s manual. Once the devices are paired successfully they will keep on recognizing

each other automatically.

Notes:

• If you want to listen music via your mobile phone, please make use of your mobile phone‘s

instruction manual.

• If you want to disconnect your mobile phone, switch off the bluetooth function of your mobile

phone. The headset can now be linked to another bluetooth compliant device.