Instruction manual

2.) Connect the headset with audio device (Channel 1)

1) To enable the headset on channel 1 (CH 1) press the „-“ key for 3 Sec.

2) Switch the Pairing-key of your headsets from position CH1 for a short time to position CH2

and back to CH1.

3) Please make use of the instruction manual of your audio device to see how to connect it to the

headset.

Note:

• If you want to disconnect your audio device, switch off the bluetooth function of the device.

The next time you switch on both units simultaneously, they will be connected automatically.

3.) Activate the intercom function (Channel 2 / only BHS-600)

1) To activate the intercom function on channel 2, make sure that the relevant key is switched on

position „master“ at one of the headsets, and at the other headset the relevant key have to be

switched on postion „slave“.

2) Activate channel 2 (CH 2) by pressing the „+“ key on both headsets for 3 Sec.

3) Switch the Pairing-key of your headsets from position CH2 for a short time to position CH1

and back to CH2.