Operation Manual

CampSat Single/Twin

Turning on the System

1. Follow the steps below to turn on your antenna system.

2. Make sure the antenna has a clear view of the sky.

3. Turn on your satellite TV receiver and TV.

4. Apply operating power to the IDU.

5. Wait one minute for system startup. The IDU will display the tracking

sSatellite screen after system testing is complete.

Turning off the System

Follow the steps below to turn off your antenna system.

1. Remove operating power from the IDU.

2. Turn off your satellite TV receiver and TV.

Changing Channels

If you have followed the installation instructions, your system should

be set to the satellite of your choice and the system should have

downloaded the appropriate channel guides. When the antenna

systemandsatellitereceiverisproperlycongured,itiseasytochan-

ge the channel using the remote control that normally comes with

the receiver unit.

Watching TV

Theantennaisdesignedtooperateasefcientlyandasreliably

as possible when the vessel is moved and anchored. It is also the

quickest satellite acquisition system available among the antennas.

If you have anchored the vessel and the antenna has completed to

searching selected satellite, turn off IDU power to avoid unnecessary

use of power. Because the LNB receives its power from the satellite

receiver through the IDU, the antenna will continue to receive the

satellite TV signals.

Betrieb/ Operation