CB-104S QUAD SWITCHER INSTRUCTION MANUAL Thank you for purchasing this product. For proper usages and application, Please read this instruction manual thoroughly. INSTRUCTION MANUAL Tel. Fax. +49 (0) 4154 / 80 83 - 0 +49 (0) 4154 / 80 83 - 20 E-mail Internet info@camos-multimedia.com www.camos-multimedia.com Address CAMOS Europe GmbH Carl-Zeiss-Str. 3 D-22946 Trittau PRINTED IN KOREA ver. 1.
CONTENTS SAFEGUARD INSTRUCTIONS ......................................... 3 SAFEGUARD INSTRUCTIONS QUAD SWITCHER Please read the “Safety Rules” carefully before using this product. Following the safety rules prevents users from damages related with the misuse of the product. It is very important to follow these safety rules. We state “Caution” and “Warning” to clarify any potential risk for a damage associated with the misuse of the product. NOTICE FEATURE ...............................................
1 WARNING Do not put the product in place where sudden temperature increasing and should use on optimum voltage, temperature and humidity. - It may cause to electronic shock or malfunction. FEATURE QUAD SWITCHER • Connecting max. 4 cameras and 1 A/V input • User can choice split screen ( 2/ 3/ 4 / H Split screen ) • 4 of Trigger Line input • Auto switching function • MIRROR screen support for camera input • NTSC/PAL (User can choice manually) Do not get product wet and operate with wet hands.
3 FUNCTION OF EACH PART QUAD SWITCHER [ Front Terminal ] [ Remote Controller ] ④ ① ② ⑤ ③ ⑥ ④ ① ② ③ Terminal Name (Input/ Output) ① 4CH TRIGGER LINE ⑦ ⑧ ⑨ ⑩ ⑫ Function Camera input signal terminal that display camera screen ⑪ connected by Trigger Line.
4 FUNCTION QUAD SWITCHER 1 POWER ON/OFF 4 Screen Switch Attach Remote signal receiver to body and press power button. Then the monitor shows input signal. ※ If there is no image, the screen will be BLACK. Even in that case, if there is audio signal input, user can hear audio signal and mute and volume control is available. 1) Screen Switch (CAM 1~CAM4) The screen switches the screen to below order by pressing ▼ button.
4) 3 split screen switch 6 Screen switch while trigger input Press TRIPLE SCR. Button to go into 3 split screen directly and if press it twice the split mode changes as below. CAM3 CAM1 CAM1 CAM2 CAM2 CAM3 What is or ? We call it when a circuit works by a signal for example if driver uses right/left turn signal or reverse gear, the monitor shows connected camera screen on driving mode.
5 2) When there is input signal more than 2 triggers, the monitor display fully connected screen (Trigger input screen) as the priority order. And the screen goes former one when the signal is disappear. If there is one trigger disappears, the rest will be display as the priority order.
3 AUTO Switch function 5 Split screen position 1) Press setup button on remote controller then go into OSD MENU [PICTURE SET] • SETUP window on 2 split screen PICTURE SET BRIGHTNESS CONTRAST COLOR HUE VIDEO SYSTEM AUTO SWITCH RESET 1) Press SETUP button on remote controller and go into OSD MENU [SETUP] window. 50 50 50 50 NTSC OFF ▶ CAM1 CAM2 SPLIT SETUP - SET LEFT - SET RIGHT CAM1 2) Press ▼button to move AUTO SWITCH menu and set the auto switching time.
6 2) On [SETUP] window, choice a place where want to change and press ok button to go into [INPUT] window. Choice a screen by pressing ▲▼ button and save it by OK button. ※ Press SETUP button on [INPUT] window to go former OSD MENU. INPUT CONNECTING AND INSTALLATION QUAD SWITCHER ① Before installation, please the body on enough place easy to radiate a heat. ② Install the body with enclosed screws as below picture. ③ Fix the body firmly and connect power cable.
7 SPECIFICATIONS MEMO QUAD SWITCHER QUAD SWITCHER Power Supply Power Consumption Video In Camera In Monitor Out Audio Jack DC IN DC OUT Remote Infrared LED Operating Temperature Storage Temperature Material Dimension Weight NOTICE 18 DC IN 12V~24V 200mA (Set only) RCA (1개) 6P miniDIN (4개) RCA (2개) RCA input (1개), RCA output (1개) DC power input terminal DC power output terminal (Max.1A) Max.