INSTRUCTION MANUAL 8.4"/ 10.4" TFT LCD DIGITAL MONITOR CM-840D/CM-1040D DIGITAL TFT LCD COLOR MONITOR Thank you for choosing this product. Please read this instruction manual carefully before operating this product. TV/AV POWER CH RECALL SLEEP MENU VOL VOL AUTO PIC MUTE CH PICTURE SETUP SOUND 1 2 3 4 5 7 8 6 9 0 A.MEMO. Printed in KOREA MODE MENU DOWN CH.
Contents 1. Safety Rules 1. Safety Rules 3 2. Before Use 8 Please read the “Safety Rules” carefully before using this product. Following of the safety rules prevents users from any damage related with the misuse of this product. It is very important that users follow these safety rules. We state “Caution” and “Warning” to clarify any potential for damage associated with misuse of the product. Warning 3. Special Features of the product 10 4. Terms of part 11 5. Remote Control 12 6.
Do not use in bathtub. Do not pull the plug with wet hands. --- This may cause electric shock. Do not use unapproved power voltage. --- This may cause fire or electric shock. Caution Do not use unapproved Cigarette Lighter Adapter. --- This may cause fire ,electric shock and/or malfunction. Do not put the product in a place where sudden temperature increase occurs such as the vehicle’s dashboard. Do not damage or bend electric cord. Do not place heavy objects on electric cord.
Unplug the product and remove cords when moving. --- It may damage cords and cause fire and/or electric shock. The car engine should be running when you use the product in a car. --- Without the engine running, you may have excessive discharge of the car battery. Do not pull the cord line when you unplug it. --- Damaged cords may cause fire and/or electric shock.
2. Before Use Precautions (when you use the product in a car) =To safely use the product, please read the user’s manual carefully before use. =Connect all lines as directed in the product connection map in the manual. =Do not touch the LCD panel. =Use the product at the temperature range of 0OC ~ 50OC . =Screen may be a little dark when the product is operated in low temperature areas. Screen will be shown normal luminosity after a few minutes.
3. Special Features of the Product 4. Terms of part = Applied high resolution and low reflection DIGITAL TFT LCD (800 x 600) = All electronic control functions ① MODE DIGITAL TFT LCD COLOR MONITOR = Convenient Graphic OSD ● If PC cture size does not match with full horizontal or vertical screen size, press the mode button continuously(2∼3 second) and wait for a little while then you can see the most appropriate screen.
5. Remote Control ① ③ TV/AV POWER ② ④ ⑥ ⑤ CH RECALL SLEEP ⑧ MENU ⑦ VOL AUTO PIC CH PICTURE SETUP ⑩ SOUND ⑫ ⑪ 1 2 3 4 5 6 7 8 9 ⑬ 0 A.MEMO. ⑭ 12 Power ON/OFF Key ⑫ SOUND Sound selection button ② TV/AV DSUB analog, external video, s-video ⑬ 0~9KEY The key does not use (only TV MODE) ③ RECALL Displays present status and volume level ⑭ A.MEMO. The key does not use (only TV MODE) ④ SLEEP The key does not use (only TV MODE) ⑮ CH.
6. Functions ※( ), it means a remote control button. 3 MENU (MENU) 1 POWER (POWER) AV/ S-VIDEO =POWER ON/OFF KEY PICTURE(PICTURE) ① Push POWER(POWER) button. POWER is on. ② Push POWER (POWER) button again. POWER is OFF. 2 MODE(TV/AV) =It is function to change external video signals to DSUB ANALOG/ VIDEO/ S-VIDEO DSUB ANALOG/ AV/ S-VIDEO BRIGHTNESS 55 CONTRAST 40 SHARPNESS 14 ※ With MODE , go to SUB MENU. After adjusting in SUB MENU, press MENU to exit.
SETUP(SETUP) SOUND(SOUND) ▶ ENGLISH LANGUAGE OSD TIME 10 TRANSLUCENT 14 ※ With (VOL ▶), go to SUB MENU. After adjusting in SUB MENU, press MENU to exit. MUTE OSD H POS. OSD V POS. FACTORY RESET VOLUME 10 TREBLE 50 BASS 50 OFF ① LANGUAGE Change language English, French , German , Spanish , Italian, Japanese, Korean. ① MUTE Mute the sound temporarily. Mute is released when you change channel and adjust volume.
PC (ANALOG) COLOR PICTURE BRIGHTNESS 75 ※ With (VOL ▶), go to SUB MENU. After adjusting in SUB MENU, press MENU to exit. The tone of color can be changed from red-dish white to bluish white. The individual color components are also user customizable. CONTRAST USER H POSITION ※ With (VOL ▶), go to SUB MENU. After adjusting in SUB MENU, press MENU to exit. 50 V POSITION PHASE PIXEL FREQ. RED 14 GREEN 100 BLUE 18 ① BRIGHTNESS Adjust the brightness of video without affecting RGB s brightness.
DISPLAY MODES For the display modes listed below, the screen image has been optimized during manufacture. Mode VGA 4 RECALL Displays present status and volume level. 5 AUTO PIC Selects DYNAMIC, NORMAL, MILD, USER for PICTURE 6 TV/AV External DSUB analog, video, s-video Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Pixel Clock Frequency(MHz) Sync Polarity (H/V) 720 x 400 31.469 70.087 28.322 -/+ 640 x 480 31.469 59.940 25.175 -/- 640 x 480 37.500 75.000 31.
7. Connections 8 OSD MESSAGE OUT OF RANGE 1. Choose a location where you install the Monitor. Clean the place for the Stand with cleanser and remove the Safeguard tape. And then attach it exactly where you want. ① The screen shows this when signal is out of range 2. Fasten the Monitor with Tapping Screw. NO SIGNAL 3. Adjust angle of Stand and install Monitor. ② The screen shows this when there is no signal.
8. Changing Remote Control Battery CM-840D/1040D 1. Slide and open the battery cover. P.C 2. Insert new battery and ensure that the polarities are correct when inserting. (Not Supplied) DVDP (Not Supplied) 3. Slide and close the battery cover.
9. Specifications CM-840D(8.4”) SPECIFICATION SPECIFICATION ITEM LCD Panel Power supply Rear Input Power 21.336 cm (8.4 Inch) 480,000Pixels 800(W) x 600(H) Dots Frequency Dot pitch 0.212(W) x 0.212(H) mm 0.008(W) x 0.008(H) inch Input signal Brightness Contrast ratio(CR) 300cd/㎡ 250 : 1 Active area 170.5(W) x 128.4(H) mm 6.712(W) x 5.055(H) inch View angle(H/U/D) +55deg / 35deg / 35deg Voltage Consumption DC12V 10.
CM-1040D(10.4”) SPECIFICATION SPECIFICATION ITEM LCD Panel Power supply Rear Input Power 26.416 cm (10.4 Inch) 480,000 Pixels 800(W) x 600(H) Dots Frequency Dot pitch 0.264(W) x 0.264(H) mm 0.010(W) x 0.010(H) inch Input signal Brightness Contrast ratio(CR) 220 cd/㎡ 400 : 1 Active area 211.7(W) x 158.4(H) mm 8.334(W) x 6.236(H) inch View angle(H/U/D) +55deg / 40deg / 40deg Voltage Consumption DC12V 9.
MEMO MEMO
