INSTRUCTION MANUAL * Design and Specifications are subject to change without notice. ver. 1.
INSTRUCTION MANUAL Thank you for purchasing this product. For proper usage and application, please read this instruction manual thoroughly.
CONTENT TILT CAMERA FOR VEHICLES SAFEGUARD INSTRUCTIONS .......................................................... 3 FEATURES ..................................................................................................4 BOX CONTENT ....................................................................................... 4 INSTALLATION ....................................................................................... 5 CONNECTION .....................................................................
SAFEGUARD INSTRUCTIONS TILT CAMERA FOR VEHICLES Please pay attention to the warnings and cautions below in order to prevent potential risks. “WARNING” and “CAUTION” symbols are divided according to the different risk levels. May cause bodily harm or even death if the user ignores WARNING the warnings in the safety rules. CAUTION May cause damage or shorten usage time of the product if the user ignores the cautions in the safety rules.
1 FEATURE TILT CAMERA FOR VEHICLES • 1/3” SONY COLOR CCD image sensor • 6 pcs of IR LEDs for night view • Built-in microphone • Built-in heating function • Waterproof (IP-67) • Aluminum die-casting housing • Night vision using the CdS sensor.
3 INSTALLATION TILT CAMERA FOR VEHICLES 1. Determine a position and a direction of installation so that the back area of your vehicle can be effectively seen on the monitor screen. 2. Fix the camera bracket to the vehicle using the provided adhesive tape and the tapping screws with the spring washers. 3. Fix the camera between the camera bracket and sun visor by using machine screws. Adjust the angle of the camera and fasten the screws firmly. 4. Run the cable from the monitor to the camera.
4 CONNECTION TILT CAMERA FOR VEHICLES Insulation Tape Tilt Camera Monitor (Option) Extension Cable (70ft) Before making the connection, disconnect the ground terminal of the car battery to avoid short circuiting. Before inserting a plug, the pin specifications need to be checked and the plug should be firmly inserted to the jack or connector. If it has been inserted in the wrong direction, it may cause malfunction.
5 CLEANING and GENERAL MAINTENANCE TILT CAMERA FOR VEHICLES • Clean the unit with a slightly damp soft cloth. Use a mild household detergent. Never use strong solvents such as thinner or benzine as they might damage the finish of the unit. CLEANING Unplug or power off the device before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
