Operation Manual

............................................................................................................................. 1
..................................................................................................................................... 9
........................................................................................................................... 1
Adhesive tape
Screws set
Insulation tape
7
CLEANING and GENERAL MAINTENANCE
5
TILT CAMERA FOR VEHICLES
Clean the unit with a slightly damp soft cloth. Use a mild household detergent.
Never use strong solvents such as thinner or benzine as they might damage the
finish of the unit.
•
CLEANING
Unplug or power off the device before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
OBJECT and LIQUID ENTRY
Never push objects of any kind into the camera through holes as they may
touch dangerous voltage points or short-out parts that could result in a fire
resulting from an electric shock. Never spill any kind of liquid on the pro-
duct.
SERVICING
Do not attempt to service this system by yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all ser-
vicing to qualified service personal.
SPECIFICATIONS
6
TILT CAMERA FOR VEHICLES
Pick-up device
View of angle
Minimum illumination
Input voltage
Operating temperature
Dimensions
Weight
Accessories
95˚(H) / 70˚(V) / 120˚(D)
0.1 lux
DC 12V / 200mA Max.
-15˚C ~ 65˚C (5˚F ~ 149˚F)
78.4(W) x 52.0(H) x 56.5(D) mm / 3.09(W) x 2.04(H) x 2.22(D) (Camera Only)
0.4kg / 0.88lbs (including bracket and sunvisor)
1/3” 250,000 pixels COLOR CCD 1/3” 290,000 pixels COLOR CCD
NTSC PAL