CN-800 Mobile Navigation System USERS MANUAL http://www.camos-multimedia.com IMC GmbH Nikolaus-Otto-Str.16 22946 Trittau, Germany Tel.
Table of contents CN-800 Table of contents Safety information .......................................................3 Package contents ......................................................4 Installation ....................................................................5 Basic operations ..........................................................6 Connectors and control buttons ...............................7 Main Screen ...............................................................
Safety information Please read the safety information carefully before using this product. Following of the safety informations prevents users from any damage related with the misuse of this product. • Do not put pins or needles into the product or electric cord of product. • In case of damage, please switch-off the product and contact your dealer or the CAMOS customer service. • This product is only made for 12-24V DC use. Please be careful while connecting. • Check for correct polarity.
Package contens CN-800 Package contents 4 CN-800 Stand / suction base Cigarette lighter cable TMC Module (optional) AV cable (optional) RV cable (optional)
Installation Take care while mounting the CN-800 in your vehicle, whether using the windshield mount or other mount, that it does not obstruct the driver’s view of the road. Make sure that the placement of the CN-800 and cable does not interfere with the operation of vehicle safety devices, such as air bags. You assume the risks associated with damage to your vehicle or vehicle’s occupants as a result of how you choose to mount the CN-800.
Basic operations Switching battery state CN-800 Switch ON the battery ON/OFF switch on the rear side of the unit. After starting engine, your device will start up automatically or push the power button to start the device. Power ON/OFF Basic operations To turn ON the CN-800 push the power button on the top side. The first time you turn on your CN-800, it may take up to 5 seconds to start. To power OFF the device, push the power button 2 seconds.
Connectors and control buttons Front and top components CN-800 Power button Press short to switch LCD on/off. Hold (2 sec.
Connectors and control buttons Connectors and control buttons CN-800 Rear, right and left side components 8 1 MIC input 2 RS-232 port To connect external microphone 3 Line-Out 4 Rear-Cam 5 AV-In 6 DC Input 12~24V DC Input 7 Mini USB Connect USB cable for charging or activesync, connect optional TMC module 8 SD-Slot Slot for SD-Card with navigation software, music, videos, etc. 9 USB-Host To connect USB-Host devices like USB memory or HDD etc.
Connectors and control buttons 11 Mounting holes External GPS antenna port 13 Ext.
Main Screen CN-800 CN-800 has two different main screens. The default main screen like shown below. Main Screen And another main screen where you can set an image or photo from the photo application as wallpaper.
Time, speed and direction This screen provides information about time, your current speed an direction. CN-800 Please do not rely on it. Time, speed and direction The accuracy of the speed shown by the speedometer depends on the satellite signal strenght. Sometimes it may not be correct. It also may not show the same as the speedometer of your vehicle, because there are tolerances and other things that may affect the shown speed.
Split screen and quick overlay Split screen and quick overlay CN-800 By pressing the mode button while you are in navigation mode you can open a quick overlay menu. 12 It is possible to run navigation and another application like phone, AV-In, video or music player at the same time. The split screen function in the AV-In application allows to run rearview camera or AV signal and navigation half and half on the screen.
Bluetooth phone control CN-800 The phone menu allows you to use your device as a handsfree device for a mobile phone supporting Bluetooth connection. You can tap your device to place and receive phone calls instead of picking up the mobile phone. Pairing with a mobile phone The next time you run the phone program, your device will automatically search and pair with one of the last connected mobile phones. NOTE: • Your device must be in pair mode for the mobile phone to find your device.
Bluetooth phone control Placing a call CN-800 After pairing with your mobile phone, you can place a call using any of the three buttons (call and call history) on the phone main screen. Bluetooth phone control By tapping the call button on the phone main screen, you can enter the telephone number with the onscreen keypad. After entering the telephone number, tap to place the call. To delete the last digit entered, tap the backspace button.
Bluetooth phone control Phone book CN-800 is supporting Phone Book Access Profile (PBAP) and you can download the phone book data from your phone. You can tap to transfer phone book data from your phone after paired your phone and CN-800. CN-800 And you can tap to edit phone number information with using the below key board.
Bluetooth phone control Receiving a call When you have a call after pairing with a mobile phone, the device rings and displays the incoming call screen. Accept the call CN-800 Reject the call Connecting devices Bluetooth phone control 1. Tap connect from phone main screen to search for nearby devices. 2. 3. 4. 5. 6. The device list appears on the screen. Tap the target device from the list of the devices. 7. Tap pairing the device you want to use as a hands-free. 8.
Bluetooth phone control Pair Mode By tapping the pair mode button on the phone main screen, you can manually set your device to pair mode. Within the duration of 4 minutes, you can initiate the pairing process on your mobile phone to discover your device as a hands-free device or a headset. CN-800 Preferences Your device incorporates Bluetooth wireless communications technology.
Bluetooth phone control Advanced Audio Distribution Bluetooth phone control CN-800 CN-800 supports advanced audio distribution function via Bluetooth. You can hear music from the memory of your phone using the navigation and you can control simple functions as shown in the following screenshot.
AV/RV/IR input AV/RV input CN-800 Tap AV or RV button to choose the screen you want to show. You can use PIP (Picture in Picture) function with Navigation with button for multi tasking. AV/RV/IR input IR input (External DVD Player - optional) You can control an external DVD player via the IR-input by using the DVDcontrol buttons.
Music player Starting and closing Music player Music player CN-800 Music Player features: • Playback of music files • Basic playback controls such as play, pause, stop, next and previous • Playback includes single selection playback, repeat, single repeat, normal sequence and random sequence. 20 Tap the Music button on the main screen to start the program. The control panel appears on the screen where you can easily control the player by tapping the control buttons. To exit the program, tap button.
Music player Music playback controls Play / Pause Start or pause the playback RWD/F.
Picture viewer Starting and closing Picture viewer CN-800 Picture viewer allows you to open pictures in JPEG, GIF and BMP formats. Tap the Picture viewer button on the main screen to start the program. To exit the program, tap button. Preparing the pictures for your device Picture viewer Copy the JPEG/GIF/BMP/PNG files to a storage card or an USB device like an USB-HDD or an USB memory stick and connect it to the CN-800. 22 NOTE: Supported resolution of Photos • JPG: max.
Picture viewer Viewing a picture in full screen When you tap a picture once in the list view, the picture is displayed in full screen. To go back to the list view, tap screen. on the screen to display the picture list CN-800 Viewing the slideshow Tap to start a slideshow of all of your pictures. Rotating the picture To rotate the picture, tap . Selecting Background Image for User’s Main Screen. To change for background image of user’s main menu screen, tap .
Movie player Starting and closing Movie player CN-800 Movie player features: • Playback of movie files • Basic playback controls such as play, pause, stop, next and previous Tap the Movie player button on the main screen to start the program. The control panel appears on the screen where you can easily control the player by tapping the control buttons. To exit the program, tap button.
Movie player Playing a movie in full screen When you tap movie screen once in the Movie player view, the movie is played in full screen. To go back to the movie screen, tap anywhere on the screen to display the Movie player main screen. Settings CN-800 CN-800 is supporting full screen view and ‘smi’ subtitle file as extension and you are able to set various values such as caption size and color of these options from the below setting screen. Movie playback controls Start or pause the playback RWD / F.
Utilities Utilities CN-800 In CN-800 you find four kinds of applications with useful functions. Calculator This is an useful application that is used to perform numerical calculations, especially addition, subtraction, multiplication, and division.
Utilities Memo pad This is application is working as memo note on which you can just draw and hand write on the screen. And you can save this as image file. CN-800 Games CN-800 is providing three games for personal entertainment. Utilities E-book CN-800 is providing E-book function and you can read txt formatted files through this application.
Settings You can customize the system settings in various values and conditions. Tap the Settings button on the main screen. The Settings menu appears as shown. To exit Settings, tap the Home button. Settings CN-800 The following sections describe the various submenus and their functions. Startup settings To select the application which will run when you switch on the device, tap Specific application. You can choose from standard applications by tapping their appropriate icon.
Settings - FM Transmitter / RV FM Transmitter settings CN-800 You can transmit all sounds from your CN-800 to your car radio by using FM transmitter. Rearview camera settings Settings - FM Transmitter / RV 1. After you turn on the FM Transmitter (ON), find a frequency that is not used by a radio station on your car radio. You will use this frequency for FM transmitter of your CN-800. 2. When you search for a frequency on your radio, try to find one that has no interference at all.
Settings - Language / Touch screen Language settings CN-800 NOTE: To change the language of the Map navigation software, use Map settings. Settings - Language / Touch screen 1. Tap the Up/Down arrow button to scroll the list. 2. Tap language button to select the language. 30 Touch screen (Calibration) You can calibrate the touch screen if it is not responding accurately to your taps. 1. Tap and hold the centre of the target. 2.
Settings - Date/Time / Power Date / Time settings To set Date/Time and Time Zone Set all required information and tap button to confirm. CN-800 Power settings Set up the power saving feature: Power Off Time: Setting of Power Logic Settings - Date/Time / Power You can set a timer for Power off: - automatically turn off your device when it is idle for a set period of time. - automatically dim the LCD display when it is idle for a set period of time.
Settings - Quick menu / Mini USB CN-800 Quick menu settings If you choose quick menu on, quick menu icon will always displayed at the bottom of screen in overlay while map software is running. Settings - Language / Touch screen If you choose quick menu off, you can use only the hardware key on top of the device (‘M’ key) instead of screen quick menu in running map software. 32 Mini USB settings If you choose If you choose vice. , you are able to connect CN-800 to PC via ActiveSync.
Settings - Version information & Upgrade / Default Version information & Upgrade CN-800 Default settings You can set your device to default in this option and if you tap Set Default, your device will be set back to default. NOTE: All of your personal settings will be deleted. Settings - Version information & Upgrade / Default You can check the software version of CN-800 in this screen and also you are able to upgrade the device with new versions. See http://www.camos-multimedia.
Trouble shooting No screen displayed After powering up, if the system does not respond. 1. Connect adapter, restart system. 2. Reset system. Display speed is too slow CN-800 1. Check if the battery is low on power. 2. Reset system. Screen has no response 1. Reset system. Navigation GPS cannot display my current location Make sure your current location is not obstructed by buildings or other interferences.
Product specifications Mobile DDR 256 MB 1GB Nand Flash Memory expansion SD card socket Operating system Microsoft® Windows CE.NET 6.0 GPS chipset SiRF V5 64 channels GPS antenna Embedded type Battery Built-in Rechargeable Li-Polymer, 1,100mAh Up to 2h 30min Display 7” Digital WVGA TFT LCD Resolution 800 x 480 pixels Audio Built-in speakers(1.5W*2EA) Built-in microphone Bluetooth Spec. v1.1, v1.2, v2.
