Operation Manual

8
9
1. 7” Wide Touch LCD panel
2. SD card slot (Navigation Map)
3. DC input (12~24V)
7. External GPS antenna port
8. Speaker (Mono)
9. Multi cable port
4. Function keys (5 keys)
5. TMC port (mini USB type)
6. POWER switch
The SD card that included in the package contains map in-
formation. Before you use the monitor, please insert the SD
card to the slot.
If the power is connected, the battery is charging automatically with Red LED and it turns Green
when the charging is completed.
1. CHARGING BATTERY
2. BATTERY CHARGING TIME & USING TIME
Built-in type battery will work if the power supplying is off (turn the ignition off).
This monitor has built-in GPS antenna however it may have a
problems to get GPS signal due to tinted window. You can use
external GPS antenna in this case.
FUNCTION OF EACH PART
3
PREPARATION
4
1. SD CARD
2. BATTERY
3. EXTERNAL GPS ANTENNA (OPTION)
If the battery is fell down as at less than fixed
voltage, the pop-up screen will be showed up
as left photo. Please re-charge the battery when
the pop-up screen shows up.
In case the product is turned off completely due to battery discharge, please re-
charge the battery in advance so that it is avoided a hard on interior NAND Flash
memory.
External GPS antenna (option)
Charging time Using time
6 hours 2~3 hours
* The mentioned time means the standard using time and it could be different from environ-
ments or using custom.