Operation Manual

1. Switch on of the button located in rear side of the monitor then the power on.

2. The navigation screen will be displayed after loading.

3. Switch off of the button located in rear side of the monitor.

* Please refer to S/W manual of the map supplier for detailed map information.

This monitor has built-in battery. When you turn the ignition off of the vehicle and switch on of the

monitor, it displays as below.

If you switch off, the power is disconnected perfectly. If you do not use the

monitor for long time, we recommend you to switch off.

Please press [OK] if you want use the monitor

with battery.

OPERATION

1. POWER ON/OFF and RUN NAVIGATION

3. POWER ALERT

In case of setting of initial booting or system initialization, it

showed up the setting window for coordinate value after boot-

ing logo screen.(refer to 14 page)

The screen switches [MAP]-[MAP+CAMERA]-[CAMERA] by pressing [M] button shortly.

* NAVIGATION only model can not connect rear view camera, the screen turns black.

* PIP MODE [MAP + CAMERA]

In PIP mode, if you touch the rear view image, it moves the

position for 8 directions.

4. SCREEN SWITCH

If you press [S] button, [Volume - Brightness] adjusting screen will be displayed. You can

adjust the value by pressing [UP/DOWN] button.

5. VOLUME / BRIGHTNESS CONTROL

It can be used more smoothly by controlling the volume with right button in condi-

tion of making the volume as maximum on the navigation software.

WINDOW CE

If there is an system error while you using navigation program,

touch a button of the bottom of right side then it back to navi-

gation software.

When you press [S/B] button shortly on switch on status, the LCD screen is off and back

to stand-by mode.

If you shift into reverse gear, the LCD screen is on and display rear view image. When

move to other gear, screens off and get back to stand-by mode for [REAR VIEW MODEL],

[TELEMATICS MODEL].

In stand-by mode, it consumes the power. If the monitor stays stand-by

mode for a long time after engine-off, it may discharge the battery.

2. STAND-BY MODE (SLEEP MODE)