Operation Manual

12
13
Press [M] button long (more than 3 seconds), then it goes to configuration mode.
1. SYSTEM : General setting
- STANDARD TIME
- DAYLIGHT SAVING TIME
- LANGUAGES
- AUTO DIMMER
- POWER SAVING MODE
- SYSTEM INFORMATION
- DEFAULT FACTORY SETTING
2. CALIBRATION : Touch coordinate setting
3. REAR CAMERA : Connected camera setting
- BRIGHTNESS
- CONTRAST
- COLOR
- TINT
- MIRROR VIEW
- CAMERA MIC.
- DISPLAY REAR VIEW
- PARKING GUIDE LINE
4. CLOSE : Screen close
CONFIGURATION
6
1. SELECT STANDARD TIME ZONE
- Set the standard time zone of the country by touching [+],[-] button.
2. DAYLIGHT SAVING TIME
- Set the daylight saving time
3. SELECT LANGUAGE
- Set the GUI language.
4. AUTO DIMMER
- If you set this function, it adjusts the brightness automatically by dimmer sensor.
5. POWER SAVING MODE
- If you set this function, it turns to stand-by mode automatically when the power off.
6. SYSTEM INFORMATION
- It displays current S/W version.
7. DEFAULT FACTORY SETTING
- It turns to factory setting mode. The system will restart.
8. SAVE & CLOSE
- Save the setting and screen close.
1. SYSTEM SETUP