Operation Manual

Regardless of Camera microphone’s on/off, it outputs the navigation voice at the

screen of [NAVIGATION] / [PIP].

tion of “ON” at camera microphone. Also, the microphone volume

could be controlled by using the side button.

The camera microphone sound will be output when it is become the full screen mode in condi-

dition of “OFF” at camera microphone. Also, the system volume

could be controlled by using the side button.

The Navigation sound will be output to the speaker even it is become the full screen mode in con-

If the camera is not connected or the microphone is not supported, this function

will not be operated normally.

* This product’s firm ware update will be made through SD card. Please follow below proce-

dure for updating.

1. Copy the [_update] folder in the SD card’s root folder.

2. After copying all update files, please insert the SD card into the product and then turn on

the product.

3. Once the loading is finished, it shows up the pop up which is asking “Update Start?” with

automatically detected the update-files in the SD card.

4. Once completed the updating, the system will restart.

* After completed the update, please delete the update files in the SD card. Otherwise,

the pop-up screen will be showed up every booting time as detecting the update files

automatically.

* Please do not turn off the product during updating. If the product turns off, please

inquire to the A/S center.

FIRMWARE UPDATE