Instruction manual

Technische Änderungen und Irrtümer vorbehalten

a) Press the / button to watch the satellite in the

pre-programmed list. Press “OK“ button to replace

the current satellite with the selected satellite.

a) Press the /button, the right screen shows the

transponder lists.

b) Press the (OK) button to select other transponder. If

you select one oft he alternative satellite names, the

transponder list is changed automatically according

tot he selected satellite name.

a) Select one oft he LNB Power types using/button.

You can select LNB Power value as 13/18V normally

or if the distance between antenna and receiver is

further than 60m, you can select LNB Power value as

14/19V.

a) Select the LNB Type value.

If you have selected User Single or User Dual, enter

LNB frequency value directly, and press (OK) button.

If you select LNB Type value as 9750/10600,

9750/10750 or User Dual, 22 kHz value is fixed to auto

mode, in other case you can select a value depending

on usage of 22kHz tone switch box.

5. Menu Operation