Instruction manual

Technische Änderungen und Irrtümer vorbehalten

a) Select Switch Type.

b) If you use an USALS motor, select from the Switch

Type using the / button.

c) Change position on your USALS motor through the

Option.

„Go to Position“: Press the (OK) button to move the motor tot he position calculated by the

longitude and latitude.

a) „Go to“ allows you to go tot he Auto Scan or Manual

Scand Mode directly.

b) Select „Auto Scan“ or „Manual Scan“ and press the

“OK” button.

5.2.2 Auto Scan

You can search the channels offered by the satellite for which your antenna has been configured.

a) Select the satellite for scanning using / button and

press the “OK” button.

b) The check mark indicates which satellite has been

marked for scanning.

c) Press the /button, select scan potion using /

button and press the “OK” button.

d) If you want to scan the satellite move to „Start

Scan“ and press “OK” button.

5. Manu Operation