Instruction manual

Technische Änderungen und Irrtümer vorbehalten

5.2.4 Transponder edit

a) Press the

Opt

button to select the satellite in the left

screen or the transponder in the right screen.

b) Select one of Delete, Edit or Add from the pop-up

window. (The satellite and transponder cannot be

deleted it the channels of the selected satellite have

already been Downloaded).

c) If you press the (OK) button, the current changing

state will be saved and exit.

5.3 Option

5.3.1 TV-Output

a) Select the TV output options using the

/// button.

b) If you press (OK) button, the changed state will

be saved and exit.

TV Type: Select your TV Type (PAL, NTSC,

PAL/NTCS)

SCART: Select your TV Type (RGB,YUV,

CVBS=FBAS).

TV-Screen: Select the screen format of your TV

(4:3, 4:3 Letter Box, 16:9).

RF CH N°: Set the Channel to display the audio

and video signal on your TV. If you

select channel 38 at this menu, the

satellite service will be displayed at

channel 38 on your TV.

RF Out Mode: RF Output Mode PAL

(PAL B/G, PAL D/K, PAL I among

PAL standards)

AC3: If you set it tot he enable mode, you

can listen to Dolby-digital audio

through AC-3 decoder.

5. Menu Operation