Instruction manual

4. Starting up and operating
1. Switch on your satellite receiver and monitor/TV. Now you can switch on the control
box. The green "LNB" indicator lights up after switching on the receiver.
2. Switch on the control box. The red indicator of the preset satellite lights up.
The red "POWER" indicator lights up, the red indicator of the preset satellite starts
blinking, then lights up continuously. Now the antenna starts the search mode.
3. When the antenna found the desired satellite, it stops and starts fine adjustment. When
fine adjustment is finished the "LOCK" indicator lights up and the TV picture appears
on the screen.
(If you have selected a TV channel in high band with vertical polarisation you can see
the TV picture already during fine adjustment)
Now the "POWER" indicator turns off and the antenna is in power save mode.
4. If the antenna does not immediately catch the desired satellite, after a short moment
the "LOCK" indicator turns off, the indicator of the(wrong) catched satellite lights up for
a short moment and the antenna starts searching again for the desired satellite.
The duration of the first search mode can be around max. 3 minutes. When you
have changed your location this mode can be much shorter because the antenna
has memorized it's previous position.
5. Selecting a satellite
a) Push within the first 3 seconds after switching on the control box the "SATELLITE
SELECT" button as often until the desired satellite indicator lights up.
b) Push (after the antenna has locked on the desired satellite) the "SATELLITE
SELECT" button as often until the desired, new satellite indicator lights up.
Now the antenna moves to the new satellite.
ASTRA 2-N please select when you are in the northern part of ASTRA2
footprint.
On/off switch
LNB indicator
Power
indicator
Lock indicator
Satellite select
pushbutton
Satellite indicators