WIDE TFT LCD COLOR MONITOR series (17”, 19”, 22”) MM-1750H / MM-1950H / MM-2250H INSTRUCTION MANUAL Thank you for purchasing this product. For proper usages and application, Please read this instruction manual thoroughly. * Design and specifications are subject to change without notice. ver. 1.
TABLE OF CONTENTS SAFEGUARD INSTRUCTIONS ............................................................................ 3 FEATURE ....................................................................................................................... 5 BOX CONTENTS ........................................................................................................ 5 FUNCTION OF EACH PART .................................................................................. 6 OPERATION .........................
SAFEGUARD INSTRUCTIONS Please read the “Safety Rules” carefully before using this product. Following the safety rules prevents users from damages related with the misuse of the product. It is very important to follow these safety rules. We state “Caution” and “Warning” to clarify any potential risk for a damage associated with the misuse of the product. CAUTION WARNING This information is for preventing damage or shorten the life time of the products.
WARNING Do not put the product in place where sudden temperature increasing and should use on optimum voltage, temperature and humidity. - It may cause to electronic shock or malfunction. Do not get product wet and operate with wet hands. - It may cause to electronic shock or malfunction. Do not place near of air bag effective range. - It may cause malfunction of air bag or accident, injury due to hitting monitor by air bag. Keep clean dust on power socket.
1 FEATURE • Digital TFT Wide LCD with high resolution and low reflection • All electronic control functions • All functions are displayed on screen (OSD function) • Auto recognition function of Video Signal system (PAL / NTSC / AUTO) • 7 languages on OSD menu (ENG-FRA-DEU-ESP-ITA-JPN-KOR) • Mode selection (HDMI - AV1 - AV2) • Built-in speaker (3Watt x 2) • Low power consumption 2 BOX CONTENTS * BASIC CONTENTS Monitor Remote Control Monitor Cable Instruction Manual AC / DC SMPS Power Cable Cigar Cabl
3 FUNCTION OF EACH PART MONITOR 1. LCD SCREEN LCD SCREEN 2. SPEAKER STEREO SPEAKER (3W x 2) 3. MENU Selecting menu and changing function 4. SELECT Button to select menu and mode 5. ADJUST Adjusting menu level or volume 6. MODE Change mode (HDMI / AV1 / AV2) 7. REMOTE SENSOR Sensor for receiving signal from the remote control 8. STAND-BY LED Displays stand-by and ON/OFF 9.
REMOTE CONTROLLER 1. POWER Power ON/OFF button 2. MODE Change mode (HDMI - AV1 - AV2) 3. UP/DOWN Moving up/down on menu 4. ADJUST/VOLUME Adjusting menu level or volume 5. MENU Selecting menu and changing function 6. MUTE Mute ON/OFF 7. RECALL Displaying the current mode and volume level 8.
4 OPERATION 1. SCREEN ON/OFF 1. Press the POWER button on the monitor front or remote controller, the screen turns on. Press the POWER button again, the screen turns off. 2. If the power is connected, the S/BY LED is on. (to show power status) When the screen is on, the S/BY LED is off. 2. VOLUME CONTROL 1. To control volume, press the adjust buttons(◀▶) on the monitor front or volume button on the remote contoller. (0~100) 2. This function is not working on “NO SIGNAL” status. 3.
4. MENU 1. Press the MENU button on the monitor front or remote control, the menu list is displayed. Press the MENU button again, it is disappeared. 2. Select a menu item by ▲▼ button on the monitor front or remote controller, then press ▶ button. 3. Adjust the value by pressing ◀▶ button, then press MENU button to fix it. * Menu item is variable depending on current output mode. • HDMI mode 1.
3. SOUND PICTURE MUTE SETUP VOLUME 10 - + SOUND TREBLE 50 - + BASS 50 - + 1) MUTE 2) VOLUME 3) TREBLE 4) BASS 10 ▶OFF Mute the sound temporarily. Mute is released when you adjust volume. Adjust the sound volume. Emphasize high frequency audio. Emphasize low frequency audio.
• AV mode 1. PICTURE PICTURE BRIGHTNESS 50 - + SETUP CONTRAST 50 - + SOUND SHARPNESS 0 - + COLOR TINT 50 - + COLOR TONE 50 - + SYSTEM 1) BRIGHTNESS 2) CONTRAST 3) SHARPNESS 4) COLOR TINT 5) COLOR TONE 6) SYSTEM AUTO NTSC PAL Adjust the brightness of the screen. Adjust the contrast of the screen. Adjust the sharpness of the video image. Change the richness of color. Change the tone of color. Change video signal system NTSC, PAL, AUTO. 2.
3. SOUND PICTURE MUTE SETUP VOLUME 10 - + SOUND TREBLE 50 - + BASS 50 - + 1) MUTE 2) VOLUME 3) TREBLE 4) BASS 12 ▶OFF Mute the sound temporarily. Mute is released when you adjust volume. Adjust the sound volume. Emphasize high frequency audio. Emphasize low frequency audio.
5. FUNCTION OF REMOTE CONTROL * This product has a function worked by only remote controller. • MUTE If press MUTE button on the remote controller, it turns mute mode and there is an icon on right top side of screen. To clear mute mode, press mute button one more or press volume button. • AUTO PIC If press AUTO PIC button on the remote controller, the screen is changed as saved on memory. The screen is changed [USER-DYNAMIC-NORMAL-MILD] by pressing button. * This function is not working on HDMI mode.
6. OSD MESSAGE OUT OF RANGE There is an error message as same as left one, when the setting value of external device is not comparable with this monitor. EX) Resolution, Refresh rate, etc. NO SIGNAL There is a message as same as left one, when the external device is not connected or power off status of external device. After connecting this monitor and external device, power on the external device. 7.
5 CONNECTION 1) REMOTE OUT EXTERNAL REMOTE SENSOR OUT 2) HDMI INPUT HDMI CONNECTOR 3) MULTI CONNECTOR DC 12V, AV1, AV2 4) DC IN 12V DC 12V input 5) VESA HOLE VESA HOLE (75 x 75mm / 100 x 100mm) AC/DC SMPS (OPTION) 12V, 5A HDMI CABLE (OPTION) POWER CABLE (OPTION) MONITOR CABLE DVD PLAYER, DVIX PLAYER (not supplied) VIDEO 2 INPUT DC IN 12V AUDIO 2/R INPUT VIDEO 1 INPUT AUDIO 2/L INPUT AUDIO 1/R INPUT AUDIO 1/L INPUT 15
6 CHANGING REMOTE CONTROL BATTERY 1. Slide and open the battery cover. 2. Insert new battery and ensure that the polarities are correct when inserting. (No. CR2025) 3. Slide and close the battery cover.
7 SPECIFICATIONS MM-1750H Screen size 433.019 mm (17.1”) Active area 367.2(H) x 229.5(V) Resolution 1440 x 900 Pixel Pitch 0.255 x 0.255 Brightness 250cd/m² Contrast ratio View angle Input voltage Input video system 800:1 80/80/75/85 (L/R/U/D) DC 12V 2 composite (NTSC / PAL), HDMI (720p) OSD language 7 languages Sound signal output Max.
MM-1950H Screen size 481.33 mm (18.95”) Active area 408.24(H) x 255.15(V) Resolution 1440 x 900 Pixel Pitch 0.2835 x 0.2835 Brightness 300cd/m² Contrast ratio View angle Input voltage Input video system 1000:1 80/80/75/85 (L/R/U/D) DC 12V 2 composite (NTSC / PAL), HDMI (720p) OSD language 7 languages Sound signal output Max. 3W x 2 User controls Operating temperature Storage temperature Dimension Weight MENU / DOWN / UP / LEFT / RIGHT / MODE / POWER 0°C ~ 50°C -20°C ~ 60°C 464(W)x330(H)x48.
INSTRUCTION MANUAL
