Operation Manual

8
OPERATION
4
1. SCREEN ON/OFF
1. Press the POWER button on the monitor front or remote controller,
the screen turns on. Press the POWER button again, the screen turns
o.
2. If the power is connected, the S/BY LED is on. (to show power status)
When the screen is on, the S/BY LED is o.
3. MODE
1. Press the MODE button on the monitor front or remote control, the
mode changes. (HDMI - AV1 - AV2)
2. Select input mode and press the MENU button on the monitor front
or remote controller then mode is changed.
* A function to change external video signals to HDMI, AV1, AV2.
HDMI
AV1
AV2
SOURCE
HDMI
AV1
AV2
SOURCE
HDMI
AV1
AV2
SOURCE
2. VOLUME CONTROL
1. To control volume, press the adjust buttons(◀▶) on the monitor
front or volume button on the remote contoller. (0~100)
2. This function is not working on “NO SIGNAL” status.