Operation Manual

12
1. Determine a position and a direction of installation so that the rear view
can be effectively seen on the monitor screen.
2. Fix the camera bracket to the vehicle using the provided adhesive tape
and tapping screws.
3. Place a camera and sun visor to xed bracket and assemble them with
enclosed screws.
4. Run the cable from the monitor to the camera.
CM-32A
Camera Connector
1. CAMERA B+ (DC +12V)
2. HEATING B+ (DC +12V)
3. NC
4. VIDEO OUT
5. AUDIO OUT
6. NOR/MIR
7. GND
Screws
camera bracket
Selfadhesif glue
Sun visor
camera bracket
Screws
Cameras
CM-32