Use and Care Manual

7
LP Tank Leak Test
For your Safety
• Leak test must be repeated each
time LP tank is exchanged or
refilled.
• Do not smoke during leak test.
• Do not use an open flame to check
for gas leaks.
• Appliance must be leak checked
outdoors in well-ventilated area,
away from ignition sources such as
gas fired or electrical appliances.
During leak test, keep appliance
away from open flames or sparks.
Use a clean paintbrush and 50/50
soap and water solution. Use
mild soap and water. Do not use
household cleaning agents. Damage
to gas train components
can result.Brush soapy solution onto
all weld seams and entire valve area.
WARNING
If “growing” bubbles appear, do not
use or move the LP tank. Contact
an LP gas supplier or your fire
department.
Connecting Regulator To The
LP Tank
Only use the pressure regulator &
hose supplied with this appliance.
See assembly instructions or
appliance nametag for regulator
model number.
1. Place LP tank
on a secure,
level, and stable
surface.
2. Turn control
knob to the OFF
position.
3. Turn LP tank OFF by turning
hand wheel clockwise to a full
stop.
4. Remove the protective cap from
LP tank valve. Always use cap
and strap supplied with valve.
Do not use a
POL transport
plug (plastic part
with external
threads)! It will
defeat the safety
feature of the
valve.