Instructions / Assembly

17
16
13. Install the 4 shelf brackets as shown in Figure 5. (Note: Leave the bolts a little
loose until the shelves are installed.
14. Install handles to shelves as shown
15. Install the side shelves by inserting hook over the bottom rod on the brackets.
Lift shelf up and rotate into upper rod. Press shelf down to lock into position.
See Figure 6.(Note: The shelf with the grease cup bracket on the side must be
installed on the left side of the grill.)
5. Install the upper shelf as shown in Figure 2. Tighten all hardware.
6. Install the lower shelf as shown in Figure 2. Tighten all hardware. Note: Lower
shelf has extra holes for the tank bracket. Shelf must be oriented so that the tank
bracket is on the side of the stove with the regulator hose.
7. Install the tank bracket as shown in Figure 2. Tighten all hardware.
8. Install the leveling feet as shown in Figure 2. (Note: The leveling feet can be
adjusted later to level the grill)
9. Install the wheels as shown in Figure 3. Tighten the axle bolt.
10. Install the wheel cap as shown in Figure 3.
11. Stand the grill upright.
12. Install rear leg bracket as shown in Figure 4.
LEVELING FOOT (2)
FTG600-17
M6 X 12 BOLT (10)
UPPER SHELF (1)
FTG600-11
LOWER SHELF (1)
FTG600-12
TANK BRACKET (1)
FTG600-23
FIG 2
CART WHEEL (2)
CCH-25
CART WHEEL CAP (2)
CCH-27
AXLE BOLT (2)
FTG600-20
M10 WASHER (2)
FIG 3
M6 X 12 BOLT (4)
M6 FLAT WASHER (4)
REAR LEG BRACKET (1)
FTG600-26
FIG 4
SHELF LEFT (1)
FTG600-3
SHELF RIGHT (1)
FTG600-4
GREASE CUP BRACKET
FIG 6
SHELF BRACKET (4)
CCH-6
M6 X 12 BOLT (8)
FIG 5