Instructions / Assembly

30
TROUBLESHOOTING - ERROR CODES
SENSOR This is an error code that occurs with the meat probe. Check to
see if you have your meat probe inserted into the port on the
faceplate. If you have your meat probe inserted, try unplugging
the probe and then plugging it back in. If the error code
persists, then you may need a new meat probe.
FLAME ERROR This happens when the fire in the grill goes out or falls below
a certain temperature and does not go back up. This happens
more so in the winter months. Also, make sure the pellets are
dry and do not have any moisture in them. If they crumble easy,
then they have moisture in them.
SENSOR This is an error code that occurs with the RTD. Check that the
RTD connection is tight. Try unplugging and plugging it back in.
If the error code persists, you may need a new RTD
OVER TEMP For your safety, if the grill goes over 600F, the controller will
automatically shut down the pellet portion of the grill to avoid
large grease fires.
WARNING Your pellet level is getting low, fill up your hopper before your
flame goes out.