Instructions / Assembly

FIG. 5
M6 HANDLE SCREW
HANDLE DEFLECTOR
M6 X 15 SCREW
GREASE BUCKET
ASH CUP
Ash Cup
1. Install Ash Cup as shown in Fig 6. Never use
grill without Ash Cup in place.
FIG. 6
ASH CUP
Install Deflector and Drip Tray
1. Install the Heat Deflector and Drip Tray as
shown in Fig 7 and Fig 8.
HEAT DEFLECTOR
DRIP TRAY
HEAT DEFLECTOR
DRIP TRAY
FIG.7
FIG. 8
HEAT DEFLECTOR
DRIP TRAY
HEAT DEFLECTOR
DRIP TRAY
Warming Rack and Cooking Grate
1. Install the Warming Rack and Cooking Grate as
shown in Fig 9.
FIG. 9
WARMING RACK
COOKING GRATE
CLEANOUT PORT CLOSED
CLEANOUT PORT OPEN
Clean-out Port Knob
1. Clean-out Port knob must be pushed in when
grill is on. Make sure pullout lock is pushed
down and locks the knob to prevent inadvertent
opening of the clean-out port. See Fig 10.
FIG. 10
WARMING RACK
COOKING GRATE
CLEANOUT PORT CLOSED
CLEANOUT PORT OPEN
2. Lift pullout lock and pull clean-out port knob to
empty ash into ash cup. See Fig 11
FIG.11
WARMING RACK
COOKING GRATE
CLEANOUT PORT CLOSED
CLEANOUT PORT OPEN
3. See instructions for burner clean-out.
Probe
1. Plug the Meat Probe into the Probe receptacle
on the control panel. Run the probe and wire
through the probe access hole on the side of the
grill. See Fig 12.
2. See instructions for Meat Probe.
FIG. 12
PROBE
PROBE HOLE