Use and Care Manual

Operating Instructions
Two Stage
Air Compressors
IN561200AV 7/11© 2011 Campbell Hausfeld/Scott Fetzer For parts, product & service information
visit www.CH-Commercial.com
1-888-606-5587
Series CE7000, CE8000 and CE9000
Table of Contents
Introduction � � � � � � � � � � � � � � � � � � � � � � � � �1
Safety Guidelines� � � � � � � � � � � � � � � � � � � � � �2
Safety Symbols � � � � � � � � � � � � � � � � � � � � � � � �2
Important Safety Information � � � � � � � � � �2
Getting To Know Your Compressor � � � � �4
Unpacking� � � � � � � � � � � � � � � � � � � � � � � � � � � �6
Installation � � � � � � � � � � � � � � � � � � � � � � � � � � �6
Operation � � � � � � � � � � � � � � � � � � � � � � � � � � 12
Maintenance� � � � � � � � � � � � � � � � � � � � � � � � 13
Troubleshooting Guide
New Installations � � � � � � � � � � � � � � � � � 15
Units in Service for a
Period of Time � � � � � � � � � � � � � � � � � � � 17
Limited Warranty� � � � � � � � � � � � � � � � � � � � 20
Introduction
The Campbell Hausfeld CE Series line
of air compressors are two stage, oil
lubricated reciprocating compressors
There are two configurations - Shop Air
Series (basic) and Tire and Lube Series
(fully packaged)�
SHOP AIR SERIES MODELS INCLUDE:
• Compressorpump
• ASMEairreceiverwithsafetyvalve
• Electricmotororgasengine
• Starter
• Pressureswitch
TIRE AND LUBE SERIES MODELS
INCLUDE:
• AllofthefeaturesoftheShopAir
models
• Aircooledaftercooler
• Digitalhourmeter
• Automatictankdrain
• Lowoilguard
• Vibrationisolationpads
• Shut-offvalve
Quick Reference
RECOMMENDED OIL (2 OPTIONS)
Single viscosity SAE 30 ISO100 nondetergent compressor oil� Available from
CampbellHausfeld,partnumberST126700AV.
10W30 synthetic oil such as Mobil 1
®
OIL CAPACITY
CE7000 Series 2 quarts
CE8000 Series 4 quarts
CE9000 Series 4-1/2 quarts
RETAIN THIS INFORMATION FOR FUTURE REFERENCE
Serial Number:
Model Number:
Date of Purchase:

Summary of content (60 pages)