Use and Care Manual

LOCATION

Selecting the proper location can significantly increase

performance, reliability and life of the unit.

◆ For best results locate the unit in an environment that is

clean and dry. Dust and dirt in the unit retain moisture and

increase wear of moving parts.

GR2100, GR2200, GR2300, GR3100, GR3200, GR3300

Pre-Operation

◆ There are mounting holes in the bottom of the open frame to

permanently mount the unit if desired. The bolt pattern is

15 inch x 23 inch and will accept 1/2 inch bolts.

◆ Store electrodes in a clean, dry location with low humidity to

preserve the flux coating.

www.campbellhausfeld.com

23.00

15.00

22.97

9.77 9.38

5.22

1.00

.56

4 Mounting Holes

for a 1/2 inch Bolt

Belt Guard

Engine

Gauge Guard

Frame

0.50

49.00

4 X 1.00

3.72

22.97

18.00

Gauge Guard

12.7218.76

Frame

10.67

Engine

Belt Guard

Lower Frame Mounting Feet

.64

4 Mounting Holes

for a 1/2 inch Bolt

MODELS GR2100, GR2300, GR3100 and GR3300MODELS GR2200 and GR3200

49.00

Figure 1 - Mounting schematics (NOTE: all measurements are in inches)