25458 DIN-Rail Terminal Kit 3/09 C o p y r i g h t © 2 0 0 9 C a m p b e l l S c i e n t i f i c , I n c .
25458 Kit Table of Contents PDF viewers note: These page numbers refer to the printed version of this document. Use the Adobe Acrobat® bookmarks tab for links to specific sections. 1. Introduction..................................................................1 2. Installation Procedure .................................................1 Figures 1. 2. 3. 4. 5. 6. 7. 15908 DIN Rail Stopper Installation ..........................................................1 15920 Terminal Strip Installation ..........
25458 DIN-Rail Terminal Kit 1. Introduction The 25458 kit can facilitate wiring when many wires need to be connected to one terminal. The kit contains one 15906 5-inch DIN-Rail Mounting Bracket, two 505 screws, two 6044 grommets, and two 15908 DIN-Rail Stoppers. A complete configuration will also include #15920 Terminal Strips, #15907 End Plates, and #15909 Jumpers. The stoppers, terminal strips, and end plates are mounted onto the DIN Rail bracket.
25458 DIN-Rail Terminal Kit FIGURE 2. 15920 Terminal Strip Installation FIGURE 3.
25458 DIN-Rail Terminal Kit 2. Insert the 15909 Jumpers in the terminal strips as shown in Figure 4. FIGURE 4. 15909 Jumper Installation 3. Mount the DIN Rail bracket onto the enclosure backplate using two 505 screws and two 6044 grommets (see Figure 5). FIGURE 5.
25458 DIN-Rail Terminal Kit 4. Connect the wires to the terminals (see Figures 6 and 7). The 8125 flatbladed screwdriver is used to open the terminals’ guillotines for wire entry. FIGURE 6. An Installed and Wired 25458 DIN Rail Terminal Kit FIGURE 7. The 25458 DIN Rail Terminal Kit facilitates wiring of multiple HMP45C sensors.
This is a blank page.
Campbell Scientific Companies Campbell Scientific, Inc. (CSI) 815 West 1800 North Logan, Utah 84321 UNITED STATES www.campbellsci.com info@campbellsci.com Campbell Scientific Africa Pty. Ltd. (CSAf) PO Box 2450 Somerset West 7129 SOUTH AFRICA www.csafrica.co.za cleroux@csafrica.co.za Campbell Scientific Australia Pty. Ltd. (CSA) PO Box 444 Thuringowa Central QLD 4812 AUSTRALIA www.campbellsci.com.au info@campbellsci.com.au Campbell Scientific do Brazil Ltda.