Manual

Appendix A. Changing GPS16X-HVS Settings
Drivers should be loaded before plugging the A200 into the PC.
The A200 drivers can be downloaded, at no charge, from:
www.campbellsci.com/downloads.
A.1.1.2 Wiring
One end of the A200 has a terminal block while the other end has a type B
female USB port. The terminal block provides 12V, G, TX, and RX terminals
for connecting the GPS16X-HVS (see FIGURE A-1 and TABLE A-1).
A data cable, CSI part number 17648, ships with the A200. This cable has a
USB type-A male connector that attaches to a PC’s USB port, and a type B
male connector that attaches to the A200’s USB port.
TABLE A-1. A200 Wiring
Color
Sensor
Cable Label
A200
Terminal
Red 12V +12Vdc
Black G G
Yellow G G
White Rx Rx
Gray Tx Tx
Blue sig ground G
Shield sig ground G
FIGURE A-1. A200 Sensor-to-PC Interface
NOTE
A-2