Owner's manual

Section 18. CsiDataSource Control Reference
Default Value
This property is set to FALSE by default.
COM Return Values
Table of Possible Values
Code Meaning
S_OK Success: Normal return
18.1.2 Methods
DSource.connect()
Name
DSource.connect()
Description
This method allows you to connect to the LoggerNet server. When you invoke
this method, the control will attempt to connect to the specified LoggerNet
server. If it succeeds, you will receive the event onControlReady. If you are
already connected, you will receive the COM error
E_CSI_ALREADY_CONNECTED. If the serverName and/or serverPort
properties cannot be resolved or are incorrect, then you will receive the error
code E_CSI_BAD_HOST_OR_PORT.
COM Return Values
Table of Possible Values
Code Meaning
S_OK
Success: Normal return
E_CSI_ALREADY_CONNECTED
Error: Already connected to the server
E_CSI_BAD_HOST_OR_PORT
Error: Server hostname or port is
incorrect
DSource.createAdvisor()
Name
DSource.createAdvisor()As Object
Description
This method creates a new advisor object. Keep a reference to the advisor so
that it will not go out of scope. If you create and start an advisor but don't get
any data, then you are probably letting the advisor go out of scope. When
handling multiple advisors, use a collection or list. The property advisorName
is provided for convenience when using a collection to hold names of the
advisors you create.
18-4