Manual

NL120 Ethernet Module
Cable Requirements: Use a straight-through Ethernet cable when the
cable is run from the hub to the NL120. Use a
crossover Ethernet cable when the cable is run
directly from the computer to the NL120. Use
a shielded Ethernet cable and/or the 28033
surge suppressor when the cable length is
greater than 9 ft.
Software Requirements: LoggerNet 3.2 or later
PC400 1.3 or later
Dimensions: 10.2 x 6.4 x 2.8 cm (4.0 x 2.5 x 1.1 in)
Weight: 66.6 g (2.35 oz)
FIGURE 5-1. NL120 Ethernet Module
6. TCP/IP Functionality
This section describes the main TCP/IP functionality of a datalogger with an
NL120 attached. Additional functionality may be added in the future. For
more information, refer to the Information Services section of the datalogger
manual and CRBasic Editor Help.
5