Software Owner's manual

RTMC Pro

• To check th lock of the C

http://192.1 tml

• To check th :

http://192.1 .14/weathe &URI=Server:CR1000

_ip&format=html

Datalogger

e c SI Web Server:

68.4.14/weather/?command=clockcheck&format=h

e clock of the CR1000 in the LoggerNet server data source

68.4 r/?command=clockcheck

In this example, you are directly .168.12.55.

• To check th ck of the d

http://192.1 2.55/?comm

ClockSet

Sets the time for the station specified by the URI. For the CSI Web Server, a

user name and password that has at least read/write rights must be entered (or

previously entered in the same Likewise,

for direct datalogger access, if a .csipasswd file has been sent to the datalogger,

a user name and

session) or the c

URI The URI can be specified as URI=source_name:station_name.

For direct datalogger access, the URI can be omitted.

nd.

With ClockSet, the time returned is

the time before the clock was set.

Code Description

accessing the datalogger at 192

e clo atalogger:

68.1 and=clockcheck&format=html

session) or the command will fail.

password must be entered (or previously entered in the same

ommand will fail. ClockSet has the following parameters:

Time The time to set the clock to, in the format of YYYY-MM-DD

T:HH:MM:SS.MS. MS is optional.

Format The Format is the file format for the result of the comma

Options are HTML, JSON, or XML.

A result code, time, and description are returned for

ClockCheck and ClockSet.

1 The clock was checked (successful)

3 The LoggerNet session failed (LoggerNet data

sources only)

Invalid LoggerNet logon (LoggerNet data

sources only)

data sources only)

2 The clock was set

5 Blocked by LoggerNet security (LoggerNet