Owner's manual

SM4M/16M Storage Module

Table of Contents

PDF viewers note: These page numbers refer to the printed version of this document. Use

the Adobe Acrobat® bookmarks tab for links to specific sections.

Section 1. SM4M/SM16M Storage Module Overview.1-1

1.1 Specifications........................................................................................ 1-1

1.2 Physical Description ............................................................................. 1-2

1.3 Power.................................................................................................... 1-3

1.3.1 Primary Power............................................................................. 1-3

1.3.2 Backup Power and Data Retention.............................................. 1-3

1.4 Function................................................................................................ 1-3

1.4.1 Operation with Current Dataloggers ........................................... 1-3

1.4.2 Operation with Dataloggers with Older Operating Systems........ 1-4

1.4.3 Data Retrieval/Telecommunication Command State................... 1-4

1.4.4 Memory Configuration................................................................ 1-5

1.4.5 Baud Rates .................................................................................. 1-5

1.4.6 File Marks................................................................................... 1-5

1.4.7 Power-up Status Indication ......................................................... 1-6

1.5 Quick Start-Up Procedure..................................................................... 1-7

1.5.1 Preparation.................................................................................. 1-7

1.5.2 Programming the Datalogger to Send Data to the

Storage Module ..................................................................... 1-7

1.5.3 Manual Dump.............................................................................. 1-7

1.5.4 Data Retrieval ............................................................................. 1-7

Section 2. Storing Data from Current Dataloggers ...2-1

2.1 Instruction 96—Output Data Under Program Control.......................... 2-1

2.1.1 Multiple Storage Modules with the CR500/510, CR10/10X,

or CR23X.................................................................................. 2-2

2.1.2 Use of Two Storage Modules with the 21X or CR7.................... 2-3

2.2 *8 and *9 Mode—Keyboard-Initiated Data Transfer ........................... 2-3

2.2.1 *8 Mode—CR500/510, CR23X, CR10/10X............................... 2-3

2.2.2 *9 Mode—21X or CR7............................................................... 2-3

2.3 Storing Burst Measurement Data from the CR10/10X, CR23X,

or 21X.................................................................................................. 2-4

2.3.1 Burst Data with CR10/10X, CR23X Dataloggers....................... 2-4

2.3.2 Burst Data with 21X Dataloggers ............................................... 2-4

Section 3. The Printer Enable Method of

Data Storage............................................................3-1

3.1 Baud Rates............................................................................................ 3-1

3.2 Storing Data from the 21X and CR7..................................................... 3-1

3.2.1 Instruction 96—Output Under Program Control......................... 3-1

3.2.2 *4 Mode—Output Device Enable ............................................... 3-2

3.2.3 *9 Mode—Keyboard-Initiated Data Transfer ............................. 3-2