User Manual

VisualWeather

™

Software

7.3.2 Edit

To Edit a batch report that has already been created, select it in the list and

click the Edit butto n. The batch report will be loaded in the Report Selection

screen. Edit the selections an d click the Save Batch button. The ch anges will

be saved.

7.3.3 Run

All batch reports, including those set up as scheduled, can be run on demand.

Select the batch report you wish to run and click the Run button. The report

will be generated.

Running a scheduled batch report will not affect its schedule. If

you wish to edit the schedule of a batch report, edit the batch

report and change its generation time.

NOTE

7.3.4 Delete

To delete a batch report select it in the list and click th e Delete button. The

batch report will be deleted.

This action cannot be undone.

NOTE

8. Station Data

To view a graphical representation of the current weather conditions for all of

the stations in your network, select the Station Data heading

Each station is displayed on its own screen. The tabs at the top of the window

can be used to navigate between screens. The data displayed must be collected

through scheduled or manual collection. VisualWeather does not actively

collect data to be displayed by Station Data.

The data displayed will be based upon the sensors that were selected when the

weather station was configured (or, for a custom station, the Data Fields

associated with the Real Time Parameters when setting up the Real Time Field

Mapping). The units u sed will be based on the options chosen from

VisualWeather’s Tools | Options menu item.

The data is displayed as a project developed with Campbell

Scientific’s RTMC Pro Development software. The project file

is VW_Multistation.rtmc2 and is saved in

C:\CampbellSci\VisualWeather\RTMC. If y ou ha ve R TM C P ro , y ou

may make changes to this project (i.e., display additional

components). Once you have made changes to the project,

VisualWeather will not modify the proj ect. If you want to revert

to VisualWeather’s default project, you will need to delete the

project file. VisualW eather will then recreate the p roject the nex t

time Station Data is opened.

NOTE