Specifications

ISU AT Command Reference Summary of Result Codes
Iridium Proprietary Version 2.45
20 June 2011 117
Table 11-1: V.25ter/Hayes Result Codes (continued)
as verbose ‘+DR: V42B NONE’ Data call connected with no data compression.
as verbose ‘+DR: V42B TD’ Data call connected with V.42bis compression
enabled on transmit direction.
as verbose ‘+DR: V42B RD’ Data call connected with V.42bis compression
enabled on receive direction.
as verbose ‘+DR: V42B’ Data call connected with V.42bis compression
enabled on both transmit and receive direction.
Table 11-2: GSM 7.07 Result Codes
Numeric
(
V0
)
V
erbose
(
V1
)
Descri
p
tion
as verbose ‘+CR: ASYNC’ Asynchronous transparent data connection.
as verbose ‘+CR: REL ASYNC’ Asynchronous non-transparent data connection.
as verbose ‘+CME ERROR: <error> Command not accepted. See section 5.56.
as verbose ‘+CREG: <stat>[,<lac>,<ci>]
Registration indication status (unsolicited if
enabled). See section 6.21.
as verbose ‘+CRING: ASYNC‘ Asynchronous transparent data call indication.
as verbose
‘+CRING: REL ASYNC‘ Asynchronous non-transparent data connection.
as verbose
‘+CRING: VOICE‘ Voice call connection.
Table 11-3: GSM 7.05 Result Codes
Numeric
(
V0
)
V
erbose
(
V1
)
Descri
p
tion
as verbose ‘+CMTI: <mem>,<index>’
SMS-DELIVER message indication (unsolicited
if enabled). See section 6.12.
as verbose
‘+CMT:
[<alpha>],<length><CR><LF><pdu>’
(PDU mode)
SMS-DELIVERs message indication (unsolicited
if enabled). See section 6.12.
as verbose
‘+CDS:<length><CR><LF><pdu>’
(PDU mode)
SMS-STATUS-REPORTs message indication
(unsolicited if enabled). See section 6.12.
as verbose
‘+CMS ERROR: <error> SMS command failed. See section 6.5.
Table 11-4: Iridium-specific Result Codes
Numeric
(
V0
)
V
erbose
(
V1
)
Descri
p
tion
as verbose ‘READY’
Ready to receive SBD binary message data from
DTE. See section 8.12.
as verbose ‘+AREG:<event>,<reg error>’ Auto-registration event report. See section 10.18.
as verbose ‘+CIEV:<sig><value>’ Indicator event report. See section 10.2.
as verbose '+ADJANT:<deployed>'
User antenna adjustment is required. See section
11.1.