Specifications

ISU AT Command Reference Phase II AT Commands

Iridium Proprietary Version 2.45

20 June 2011 43

6.16 +CPBS - Select phonebook storage

Set Command: +CPBS=<storage>

Set command selects phonebook memory storage <storage>, which is used by other phonebook commands.

<storage> should be of string type enclosed by “”; for example, “FD”.

<storage> takes the following values:

FD SIM fixed dialing phonebook

LD Last ten calls dialed phonebook

ME ISU phonebook

MT combined ISU and SIM phonebook (default)

SM SIM phonebook

Read Command: +CPBS?

Read command returns currently selected memory, the number of used locations and total number of loca-

tions in the memory. Response is in the form:

+CPBS: <storage>,<used>,<total>

where <used> indicates the number of used locations and <total> shows the total capacity of <storage>.

Test Command: +CPBS=?

Test command returns supported storages.

6.17 +CPBW - Write phonebook entry

Exec Command: +CPBW=[<index>][,<number>[,<type>[<text>]]]

Execution command writes phonebook entry in location number <index> in the current phonebook

memory storage selected with +CPBS. Entry fields written are phone number <number> (of address type

<type>) and text <text> associated with the number. If those fields are omitted, phonebook entry is

deleted. If <index> is left out, but <number> is given, entry is written to the first free location in the

phonebook. Both <text> and <number> should be of string type enclosed by ““; for example,

“John”,”1234”.

Test Command: +CPBW=?

Test command returns the location range supported by the current storage, the maximum length of <num-

ber> field, supported number formats of the storage, and the maximum length of <text> field. Response is

in form:

+CPBW: (list of supported <index>s),<nlength>,(list of supported