Instruction manual

9
APPENDIX C – DATA STORAGE
C.1 Input Locations
Default explanations for the Input/Final Storage location usage in MultiLogger unless user
configured;
Input Storage #
Label
Explanation
1
Logger ID
Datalogger ID 1-9999
2
Year
Year when last readings taken
3
JulianDay
Julian Day (1-365) when last readings taken
4
Time-HHMM
Time (24 hour) when last readings taken
5
Seconds
Seconds when last readings taken
6
DecimlDay
Decimal Day when last readings taken
7
ElapsdHr
Elapsed Hours from “Start”
(if “Log” selected as “Scan Interval”)
8
ElapsdMin
Elapsed Minutes from “Start”
(if”Log” selected as “Scan Interval”)
9
ElapsdSec
Elapsed Seconds from “Start”
(if “Log” selected as “Scan Interval”)
10
Battery
Datalogger battery voltage
11
PanelTemp
Datalogger panel temperature (°C)
47-78
Mx1
Readings from Gages on Mux #1