Instruction manual

CC5MPX Digital Camera
3
Communication Switched Power Output
Maximum Output Current: 750 mA
RS-232 and RS 485
Max. BAUD rate: 115.2 KBAUD
The recommened maximum cable length at this BAUD rate is 15
meters. The use of the 57.6 KBAUD rate has a recommended
maximum cable length of 30 meters.
Memory Card Interface
Type: Secure Digital (SD)
File System: FAT32
File Type: JPEG (image), AVI (video)
Size: Verified up to 16 GB
Dimensions
Length: 220 mm (8.7”), 229 mm (9.0”) w/ zoom lens
Width: 93 mm (3.7”)
Weight: 1.06 kg (2.34 lbs.)
3. Getting Started
Enusre that the pigtail end of the power cable is properly terminated (see Wiring,
Section 4) before connecting the power cable connector to the camera. If the power
supply has an on/off switch it is also recommended to switch the power off before
connecting the power connector to the camera.
For the initial power up and set up of the camera, it is useful to unscrew the
protective cap that protects the push button and LED indicator.
3.1 Factory Setup
The following table outlines some of the CC5MPx settings that are relevant for
initially communicating with the CC5MPX camera:
Table
3-1
CC5MPX Default Configuration
Configuration Setting
Value
Power Mode Fully on
Link Local IP 169.254.99.99
Network IP Address
192.168.1.90 (Static)
Network Mask 255.255.255.0
Serial I/O Port RS-232
RS-
232 Baud Rate
115200
PakBus Address
55
Note