Instruction manual

CC5MPX Digital Camera
5
3.4.2 Static IP Address Setup
If your computer is not set to use DHCP to obtain an IP address automatically, you
will need to follow the procedure outlined in this section to access the camera’s
webpage. It may be beneficial to speak with someone in your IT department if you
are not familiar with configuring devices for operation on a network.
The default static IP address for the camera is 192.168.1.90. If the standard
assigned static IP address is compatible with your current network, you may simply
plug the camera into the network and access the web page using this IP. If this IP
address is not compatible with your network, then you will have to connect the
camera directly to your computer’s Ethernet port in order to change its IP address.
The easiest way to connect to the CC5MPX to change its IP address settings, is to
manually configure your computer’s Ethernet IP address to be compatible with the
default address assigned to the CC5MPX.
In order to make these changes to your computer’s network settings, you will need
to have Administrator access. The procedure for changing these network settings in
Windows 7 is explained shown below:
Connect the CC5MPX camera directly to your computer’s Ethernet port. You can
use either a standard Ethernet cable or a crossover Ethernet cable, as the
CC5MPX’s auto-MDIX feature allows the camera to automatically connect using
either cable.
Open the Control Panel. If you are in Icon view, click Network and Sharing
Center. If you are in Category view, click Network and Internet, then click
Network and Sharing Center.
Figure 3-1 Network and Sharing Center