Instruction manual

CC5MPX Digital Camera
13
4.3 Ethernet Cables
The Ethernet connection is used to configure the camera settings as well as for
targeting and focusing the camera. The Ethernet port of the CC5MPX is auto
MDIX; therefore, an Ethernet crossover cable is not required when connecting the
camera to other devices.
A standard CAT5 (or better) Ethernet cable with RJ45 connectors can be used to
interface to the camera in indoor conditions or for temporary connection outdoors
when conditions permet. When an Ethernet connection is required for permanent
outdoor installations or when a connection to the camera is required in wet or harsh
conditions, the Environmental Ethernet Cable assembly needs to be used.
The Environmental Ethernet Cable assemply provides one end with an
environmental connector that provides a weather proof connection when properly
mated to the camera. The other end of the cable consists of a standard RJ45
connector. Environmental Ethernet Cable is meant to provide an Ethernet
connection between the CC5MPX and a network router, cellular modem, or laptop.
Details of the Environmental Ethernet Cable are as follows:
x CAT5E Shielded cable with polyurethane jacket.
x IP67 environmentally rated RJ45 connector on one end and a regular RJ45
connector on the second end.
x Maximum recommended cable length 70 m (230 feet)
5. Camera Hardware Description
Figure 5-1 CC5MPX Connector Layout